Its reall easy to figure out for sure if its false knock... Run some race gas. If it goes away its real. If not its false.
I had a similar problem. It was false knock. Though I did not have a...
Type: Posts; User: Seppo_Kaitainen
Its reall easy to figure out for sure if its false knock... Run some race gas. If it goes away its real. If not its false.
I had a similar problem. It was false knock. Though I did not have a...
So what is the final determination about how to disable this?
Set it to 14.7 or 12.7 across the table?
We are just the unwanted step child that they ignore......
I even offered to help them decode tables.... They basically said no thanks. I have everything to look at the raw assembly. I just...
We are shit out of luck until they open up some more tables. The only idle table we have is rpm.
race gas. 100+ octane....
Run your tank pretty low. Put in atleast 4 gallons. If the KR goes away its real Knock.
I found a 98 ls1 maf table
2.32 2.7 3.15 3.65 4.16 4.73 5.36 6.05 6.8 7.64 8.53 9.47 10.43 11.45 12.56 13.78 15.09 16.49 17.98 19.58 21.26 23.03 24.91 26.88 28.95 31.13 33.4 35.78 38.28 40.93...
Can someone post a stock ls1 MAF table then?
Been feeling that way since last june.
Technically yes.
But if you still have to keep the pcm and coils I don't really see the point. Not to mention it would be a total pita to get working much like tune to run decent.
Btw that is...
The intake would have to be completely custom as far as I know.
The DIS is really where the problem lies. (Distributorless Ignition System) It uses a sensor based off the crank pulley to tell the...
no and no
Why the heck would you want to run a carb over fuel injection anyways?
As far as I know I am the only other person that has the 99 v6 fbody hpt software.
If you get a chance let me know if your able to disable your speed limiter. Because mine is still active even...
Anyone figure this out yet? The speedo is w/i 3-4%. But the criuse control still doesn't work.
please email me the full spreadsheet at keith.handlon(at)gmail.com
I have not been able to do much yet...
But I had to up the idle rpms a litte. And tweak on the PE table.
yeah, hold your horses.... I have been waiting on v1.5 since like june 30th.
Easy tiger. I have been waiting on v1.5 since like mid July.
What year is your car? My 99 would not work w/ 3.73's. Even after using HPT for speedo correction. But
I have switched to 3.42s and got cruise to work.
They changed the maf sensor in 99 so here is the stock 99 maf table.
1.3 1.62 1.98 2.36 2.78 3.23 3.71 4.23 4.76 5.37 6.03 6.74 7.52 8.32 9.19 10.11 11.06 12.08 ...
Post screen shots(stock, then tuned) of spark and fuel changes from dyno tunning?
The Bin repository does me no good(until others w/ 99's upload) since I can't look at a 97 or 01 bin file.
Has your pcm already been modified by someone else? DHP maybe? If so that is probably you problem.
I uploaded my stock bin....
I drove for about 20 mins w/ the maf unplugged. logged the run.
Changed the 10 and 20 cells -10 based on my ltft's..... Then drove the car at least 300-400 miles. And made some more unplugged maf...
I changed my ve table and saw no difference afterwards. wtf? Anyone else make any ve changes yet?
yes it does. In 1.3 you have to set the ppm value by hand. But its pretty simple.
3.42/3.23 X (stock ppm value)