Went out did some interface logging. Tied to retrieve date and this came up on screen.
UNABLE TO OPEN FILE. INDEX WAS OUTSIDE THE BOUNDS OF THE ARRAY.
Type: Posts; User: racerx203
Went out did some interface logging. Tied to retrieve date and this came up on screen.
UNABLE TO OPEN FILE. INDEX WAS OUTSIDE THE BOUNDS OF THE ARRAY.
update connection fell off MPV!
Update again everything is working. i open so many things copy and paste until it worked. I probably couldn't do it again. If anybody cares,
Yes scanner. It didn't do this in the morning but when i went a few hours later that's when it came up.
Ok up date. Got suit working, found application number.
Still asking for licence....
Try to open scanner and i get a message that i have no license. Had HPtuner for 8years so why is this happening and where do i get my license number??
AFX is on the money but scanner reading is off. Yes car runs great. Thanks. Weird just happened out of the blue.
afx reads 14 at ible but the scanner reads 10.3
I have AFX wide band and went out to do some logging and noticed that the A/F is off on scanning then my wide band. What would cause this and how to fix ? When scanning it is stuck around 10.3 ish. ...
Thank you, Perfect info.
Where do I get my application key. Every time I try to open VCM Editor. ITS ASK FOR IT.
LOL i have the same problem and no one can fix it.:mad::mad:
3Bar, Again this only happens in 1st gear. When i run 17ish lbs of boost i have no issues what so ever. I'll hate to lower the boost becasue engine is set up to handle the powe'r so it's a waste if i...
I'm sorry it's in my car dtc. Yes hp does not have that feature. So your saying holly has that feature to turn off tcs1278 or tune around it??
Yes the 1278 is in dtc.
Yes 80s and scaled.
I run a wideband and everything is go. The ve numbers are skewed because I run tons of Meth. I am dependent on meth tune so if my 2 pumps go down my...
Hello all, I'm having an issue that's been going on for awhile now. This only happens in 1st gear pulls. 9 times out of 10 when it goes into REP Mode it will toss codes TSC1278 and every once in...
Is it possible to do this??
Are you running SD tune, if so you cannot get rid of that code. To make your SD kick in the computer must recongize maf is off. Hope this helped.
Since i turned up the boost to 30psi i cannot go wot past 6k without the engine shuts down. I did research and it looks like i have to scale my tune, so i tryed to scale 50%. Changed IFR by 50% and...
Thankyou i'll try that. Yep just went out to the car all is go thankyou again. Know i can sleep.hahahaha
Plese take a look at my scanning logging my historgram. Check if i have my pid's correct in the primary table maybe i'm missing something. Thx for looking.here's my log i can't get the main sprke to...
Well removing pid's on primary table that are not being used with your appallication. So mine was 3 bar SD. i didn't have right pid's i had maf, map and some other stuff. I needed 3 bar map not maf....
Yes, bret your solution worked. I sent bret my tune file and a scanner log. I' am running 3bar sd tune and noticed in my primary table window in scanner mode that i had files in pid that was...
Thankyou, Doesn't PE mode go to the richer PE mode first???? I have my troddle position at 20% 1.33 shouldn't that over rule the 1.00 in EQ ratio map???? I'm just trying to understand this stuff. Thx...
I'm having problems with afr command when i go into boost. There are two paramters that enable PE mode correct??? First one is TPS i have mine set to 20% at all rpm's and the second is map enable PE...
I'm having problems with afr command when i go into boost. There are two paramters that enable PE mode correct??? First one is TPS i have mine set to 20% at all rpm's and the second is map enable PE...
Here it goes