Do you have Engine RPM, MAP, Baro, Wideband, and commanded AFR (or whatever unit you?re using) all in the channels list?
Type: Posts; User: lVloses
Do you have Engine RPM, MAP, Baro, Wideband, and commanded AFR (or whatever unit you?re using) all in the channels list?
The FPCM, at least mine from the donor car, only handles fuel pressure regulation. The ECM has a wire for fuel pump level signal X1 P25. And like I said it works and reads, it just reads incorrectly...
I don?t have the FPCM hooked up on my swap yet I do have the fuel level sensor gauge wire hooked up to the correct pin on my ECM and it does read the level just fine, it?s just incorrect since it?s a...
I have a Gen V swap into a Gen IV car. Most everything is working fine except for the fuel gauge. I'm using the Gen IV car's fuel tank and pump. The reading I get from it is far from what the factory...
Updated to version 3.4 and it seems they have fixed it for the 08-09 LS4s. 07 still requires EFI Live at the moment but I'm happy it's working finally.
I never did, I'm just assuming HPTuners doesn't support flex fuel on my OS and they never will. Theoretically EFILive will work but I don't have $800 to test it out lol. If I ever find a solution...
That's why I got the harness to triple make sure everything was hooked up right on the sensor. Plus the sensor has labels on the male end of it saying Vcc, Ground, and Vout. It's wired correctly and...
Update: I got a brand new sensor from the dealer and got the harness that attaches to your coil packs and STILL no luck. I know it's possible on this OS because there's a TBSS which has the same OS...
I'm in Lincoln, NE.
Emailed support and they said my OS supports it. So anyone else have a guess as to what it could be?
Checked the frequency the sensor is sending and it fluctuates fast ranging between 60Hz and 90Hz. Not sure if the sensor is supposed to be doing that or if it's just how my multimeter is reading it...
I've unplugged the pin and plugged it back in 10 times by now probably lol. It's in there nice and straight so I don't think this is the problem. And I'm using the flex fuel kit that Pace Performance...
Definitely don't have access to that lol. Hopefully I can get it enabled somehow. I figured since it uses the e67 ECM and had the tables in the tune it would all work :/
Yeah I saw that post and went and made sure it was the correct pin and it was. And I have all the flex fuel options and alcohol tables in my tune I'm also wondering now if it's not supported or...
Any clue where I should be looking at? Here's the pin I have it plugged in to:
59856
59857
I just recently installed a flex fuel sensor in my 08 Grand Prix GXP (LS4 with e67 ECM). I enabled everything in my tune and wrote it and when I'm scanning my car all I'm seeing is 3.1% ethanol (says...
I'm switching out my current injectors for some LS6 injectors. The problem I'm having is that the only data I can find on the LS6 injectors are for older ECMs. I need data for the e67 ECM.
Mainly...