how did you solve this?
Type: Posts; User: Dragracer187
how did you solve this?
Anybody got the stock HPE600 file for a 2008 Challenger. Does anyone know what injectors were used in this kit?
I will try scaling today, we will go to 17-18psi, using the last row only will lose too much resolution, or will it work fine?
Will try 50% scaling and go from there.
Hi can someone please explain why I am going over the max cylinder air mass that is in the main spark table. The axis is not editable, it is greyed out. How to solve this. Attached is the tune and a...
Thanks that is good info.
any input?
How is burst knock triggered? I get a lot of burst knock even if I take out 6 degrees of timing, keep having burst knock.
This is the current tune.
I thought it would be easy to dial the VE map in, do some logging with afr error graph, and multiply by the error % to get closer. But is does not seem to get me closer at all. LTFT stays around 13%....
Thanks Ed for the info.
What does the table open loop gas (gear) exactly do? How does it affect the VE table?
I get a jerking behavior of the afr at cruise. How can I solve this, see log.
I...
It takes some cranking and throttle to get it to start.
Another noob question, what is the function for filtering decel for afr ve error?
Which tables do I have to adjust for cranking? Is it only FA Mult Stage 1 vs Time? I got 60lb injectors now, just multiply by 0.5 to get in the ballpark?
I am in Europe, do you think it has something to do with language selection on the laptop?
Yes I copied the labels from the map and pasted them. But fixed it manually like suggested.
They are modified stock z06 injectors. stock part numbers on there.
what am I doing wrong in the graph editor, rpm axis is displaying wrong values62038
I would verify with external knock detection equipment to make sure it is false knock before turning off.
Thanks for the advise, I have made a VE table from the VVE roughly to get started. Injectors were included in the used STS turbo kit, no info unfortunately. But they look identical to these zip...
I got it running with values of 900. :)
Which map is used of the 3 VE maps? What is IMRC?
Does someone have a example file. What are typical values for the VE table in GEN 4? Injectors are 60lb. Yes I applied the SD OS then did a entire write.
Yes it is connected.
I tried Main VE table Normal IMRC Closed and open and VE DoD at 30 and 60. Still the same, it starts and dies after 1 sec. I have set the 3 maf dtc to fail at first error.
I am trying to start the car with the SD tune, it starts and dies after 1 sec. Not sure what is wrong. I attached the rom any input is appreciated.62030
Does anybody know what the output rate for logging is of the AEM wideband? Both CAN and analog? How many Hz.
I was expecting the spark tables to have a y axis with MAP not air mass. But I guess in SD mode it still works with air mass as Y axis. I am more used to standalone ecu's then HP tuners. Learning...
I will post the tune tomorrow when I am at the laptop. Thanks for the help. I will try the suggestions.
How is the load still in mass for the timing table? How to use it?