So my IAT is now right next to the throttle body in the intake. I've also decided not to run the procharger on my truck anymore so I currently have a stock air intake with drop in K&N, should I...
Type: Posts; User: Cfogle
So my IAT is now right next to the throttle body in the intake. I've also decided not to run the procharger on my truck anymore so I currently have a stock air intake with drop in K&N, should I...
Well I just checked local weather source and found out the OE map sensor I have is more accurate compared to current baro than the one in the MAF. So I will be using it wired into the engine harness.
Thanks for info. Would I be able to use my stock map sensor I replaced with the lt4 tmap and wire it as a baro sensor? I did mock it up and compared scan tool data . OE baro (in maf) displays 13.92...
Thanks Greg. I'm still running a modified stock air box with drop in K&N filter for now and got the lt4 tmap installed today. I did see a change from 97 kpa with the stock map to 95/96 kpa with the...
So I've got the lt4 map and oe 4 pin connector for it. Ive seen setting map sensor linear and offset to 425.00 kpa and -32.50 kpa. once I do this and install the sensor, will I have any issues...
Thanks Greg for the excellent info on the lt4 map sensor. I definitely plan to wire it into my engine harness. Working at dealership for the last 9 years I've learned less connectors the better lol
So I'm about to start installing the p1sc kit on my truck and wanted some opinions on things I should get to go along with it. Would I need a new 2 bar map? Should go with a lt4 tmap and connector...
Thanks Tom!
Thanks for the info. I plan on making changes. I just wanted to look at a canned tune and see what they changed
Does anyone have a base tune that comes with the HO intercooled Procharger kit for the 2014-2018 Silverado 5.3l ? I'm going to be acquiring the kit from a donor 2015 truck and I've read the tune from...
Jmardlin, sure it's up for anyone that wants a look at it.
Thanks for the tune. I've been doing a lot of comparing my tune vs stock ones and some I've found in the repository. here is my current tune 127706 only changes I asked for when it was done is raise...
Cool. Thanks for the information TZTuning
Awesome. Thank you!
Thanks for the info! You said slightly.. is there good known numbers to aim for on the table?
Thanks!
It's had new plugs about 20k miles ago and the fish bite is somewhat random. Forgive me for lack of knowledge.. what are PE changes?
Hello. I've just bought the mpvi3 and credits and don't know anything about tuning. My goals are to improve throttle response, and change tcc lockup in 1-4 gears. Only slight mod to the truck is a GM...