Search:

Type: Posts; User: Weston@HPTuners

Page 1 of 20 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    5
    Views
    157

    It's unfortunately a bit buried, but current...

    It's unfortunately a bit buried, but current Android standards have us putting it in: /Android/data/com.hptuners.trackaddict/files/

    Phones with an SD card will likely have two "drives" appear when...
  2. This is most likely a difference between the OBD...

    This is most likely a difference between the OBD and GPS reported speeds, with one app using one and the other app using the other. GPS speeds can jump around like that if there's poor signal...
  3. Replies
    5
    Views
    157

    A few things to check first: 1) The vehicle's...

    A few things to check first:

    1) The vehicle's engine should be running, or at least ignition on. We likely wont get a connection if the car is only in accessory mode.

    2) Tap on the 'i' gear...
  4. Interesting... Would you happen to have GPS or...

    Interesting... Would you happen to have GPS or NBP set to Bluetooth as well? There is a situation with Android where if you have multiple devices set to Bluetooth, and it's not able to connect to one...
  5. Replies
    1
    Views
    74

    At this time, we don't have any plans to add DJI...

    At this time, we don't have any plans to add DJI camera support. These cameras all use different control protocols, and the manufacturers usually don't publish this information, so that severely...
  6. 17 Hz is fairly good for OBD polling over...

    17 Hz is fairly good for OBD polling over Bluetooth using the ELM protocol.

    Wireless latency issues are usually the biggest limiting factor, so your best bet would be to use NBP and just broadcast...
  7. Quite likely, Torque is running in the background...

    Quite likely, Torque is running in the background and preventing TrackAddict (and other apps) from connecting to the Bluetooth device, and it's only after you go into Torque and specifically tell it...
  8. Replies
    3
    Views
    187

    90283 The manual install ZIP file contains...

    90283

    The manual install ZIP file contains both Windows and Mac versions, so Mac users will want to simply ignore all the .exe and .dll files.

    Fortunately, the process is fairly simple for Mac,...
  9. Replies
    4
    Views
    222

    I'll get the recording state added in the next...

    I'll get the recording state added in the next update (v4.3.6 or higher)... In addition to the "KA" keep alive messages that TrackAddict currently sends, we'll now also send an "R1" or "R0" to...
  10. Replies
    4
    Views
    674

    On Mac trackpads, a two-finger click will do it....

    On Mac trackpads, a two-finger click will do it. On the Magic Mouse, you may need to first enable the "Secondary Click" option in the System Preferences, and then clicking on the right side of the...
  11. Yes, Airplane Mode should work to avoid...

    Yes, Airplane Mode should work to avoid interruptions, as long as you make sure to turn Bluetooth back on, as well as WiFi if you are using any WiFi devices.

    On iOS, this requires an external GPS...
  12. Looks like your data is in a CSV format that...

    Looks like your data is in a CSV format that should work... You would most likely need to double-click on the data file in the Input Files list, then set the "Session Time" selection to either...
  13. Most likely, it's just not able to save or update...

    Most likely, it's just not able to save or update the value in your system's registry due to some account security setting. A quick solution is usually to right-click on RaceRender, choose "Run as...
  14. Replies
    4
    Views
    222

    There's a bunch of GPS-specific data handling...

    There's a bunch of GPS-specific data handling going on in several places within the app, so it's unfortunately not likely to be practical to accept GPS data in a universal way via an NBP source. You...
  15. Yes, the OBDLink MX WiFi should work for iOS. You...

    Yes, the OBDLink MX WiFi should work for iOS. You will need to make sure your device is connected to its WiFi network, and then set TrackAddict's OBD mode to "WiFi".

    Alternatively, the PLX Kiwi 3...
  16. Replies
    5
    Views
    153

    The root cause of this is the way that the OBD-II...

    The root cause of this is the way that the OBD-II standard is defined... PID 0x11 gives us the throttle position as a percentage, based on a voltage between 0 and 5 volts, even though most TPS...
  17. Replies
    4
    Views
    196

    Sorry about that. This was a bug in v4.3.4 for...

    Sorry about that. This was a bug in v4.3.4 for Android, and I have found the cause and am releasing an update (v4.3.5) today. It should be available to users shortly...

    The quick workaround is to...
  18. Sorry about that. This was a bug in v4.3.4 for...

    Sorry about that. This was a bug in v4.3.4 for Android, and I have found the cause and am releasing an update (v4.3.5) today. It should be available to users shortly...
  19. Sorry for the inconvenience... I have located the...

    Sorry for the inconvenience... I have located the cause of this problem in a new file library that we had recently started using. It is now resolved, and the v4.3.4 update is currently in the process...
  20. That's correct. Once you tap "Set Point Here", it...

    That's correct. Once you tap "Set Point Here", it will show you that point on a satellite view map, and it is saved at that point, so unless you want to change it, just exit out of that screen and...
  21. Thanks! Yes, we've tried to offer the best...

    Thanks! Yes, we've tried to offer the best support that we can for selecting any of the phone's cameras, and I had first developed that for the LG G5 I had at the time, but some of the other phones...
  22. Most likely that channel is set to something that...

    Most likely that channel is set to something that is reporting that as a value. If you go to the Camera Preview screen, you can tap on the Data A box, then scroll down to the "Data A:" selection to...
  23. Replies
    1
    Views
    114

    At this time, the most we can automatically...

    At this time, the most we can automatically control is 1 camera on the phone (front or back), and 1 supported external camera such as a GoPro (when you are on its WiFi network). I do hope to revisit...
  24. Replies
    1
    Views
    73

    Yes, if you have an OBD-II device connected, you...

    Yes, if you have an OBD-II device connected, you can opt to set one of the data boxes in the left panel (displayed on the Camera Preview and Record screens) to display RPM and set it to alert when...
  25. My first thought is that recent versions of...

    My first thought is that recent versions of Android have a "feature" where they will show a prompt indicating that there's no Internet connectivity on the selected WiFi network and require you to...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4