I have emailed you guys back and forth.... We have everything you guys are asking to tune these, but we aren't a reseller. You guys still won't give us access to these ECUs.
Billy @ MTI
Type: Posts; User: machineworks
I have emailed you guys back and forth.... We have everything you guys are asking to tune these, but we aren't a reseller. You guys still won't give us access to these ECUs.
Billy @ MTI
yessir!!!
Only been a week......
Can anyone tune these or are they only tunable threw a resaler?
Does anyone have a 2012 F150 Roush Stage 2 File??
Do you have a file with the injector data and pump data setup? LPE is just about worthless with this info. I have both the pump and the injectors. The desired rail psi stays at 363psi through the...
It looks all the same. Same ECU for sure.
Thanks guys. Looking for a starter file for a 2015 F150 with a Procharger.
Here is the log
67448
I am tuning a C7 for another shop. This code is coming on. The think they timed it wrong.
Bump.....Any new info on these cars?
We are doing the same thing with. the AEM. Just changed the cam out. Going back together as we speak.
I do a ton of GM. Not many Mopars. Any help or tips would be great!!
61636
We don't and won't build our cars to live on meth. Not the correct way to do it. Just making sure I am not missing something.
We do 8 extra injectors with a AEM. But I keep seeing these 1k supposed cars.... I think most of them are bs tho.
I do know that they have a helper lift pump.....But how do you get the high pressure pump and injectors to each up???? I know they use meth too, but only two nozzles.
Piggy back ECU and 8 extra injectors. Fixed!
I have a break out harness on the maf with a zr1 map sensor on it and changed the baro settings
On dyno now. I will post a log
OK that worked great. But its still laying over at 5800 rpm. Anyone have any thoughts? All the data looks perfect. Timing, lambda and boost all are good but its making 737 at 5800 and by 6500 its...
I will give it a try, thanks
This is a A8. The DD tables are already higher than that stock I believe. I will check in the morning. Thanks
The throttle runs away on the top end the the pull and power and tq drop after 5,800 rpm. DD tables are stock. I lowered air mass tables to keep throttle from closing threw the runs. I tried putting...
Can't seem to figure out why the TB is closing to 46% when I raise the boost. I have tired raising the Driver Demand in AB and C tables.
I have one on the dyno, kicking my but..... These are very tricky to get right. The tb keeps closing. I have tired everything I know.....