Need a little help on a car that has 4.10 gears. Doesn't matter if I raise the rpm limit and lower the shift speed it still hits the limit. Has a 4l60e.
Type: Posts; User: UDRAchamp
Need a little help on a car that has 4.10 gears. Doesn't matter if I raise the rpm limit and lower the shift speed it still hits the limit. Has a 4l60e.
Thanks for your help. The plugs have been set up for the 4L60 but it just doesn't work
Need some help swaping a 4L60 into a car that had a 4L80. The car starts out in first and will only shift into second. Is this a common problem?? Can somone modify this file?
I will give that a try. Thank you.
I know that I can do the comparison file and do a cut and past but I was looking for a faster way to do this.
I want to put the same tune in 3 different cars that are the same year and same model. Can I just change the vin or do I have to do something with the vatts?
Thanks Russ. On the X Y tables do I do just 1-2 2-3 3-4 4-5 5-6 or do I do them all. 1-4 2-4 and so on. I will try your trans tune soon and let you know how it works out. I will...
Here is the stock tune along with a Dyno tuned one. Stock was 323 whp and tuned was 343 whp no cats. 160 stat. Car ran 13.8 stock after tuning runs 13.0. Need to get the shift much crisper.
Hi Russ I an trying to firm up the shifts on the new camaro without much success. Can you help? I will up load the file from the car and do you need the new beta version because I do have it. I would...
Are you talking about Displacment on Demand? Can you just disable it to turn it off?
Just got a new 07 Vette with auto trans and on my other Vettes I would just take out the delay time between gears and it was a nice crisp shift. I tried the same thing on this new one and it shifts...
Thanks!!! It started after I disable the VATS. Now how can I turn it back on without the same problem?
I flashed the new PCM with wright entire PCM and did the vin and vats and the car will not turn over with the key. So I tried to put the old pcm and it does the same thing . Nothing. Is there...
Thanks for letting me know. I was not sure I could do it.
Flashing a reman computer. Can you flash a reman computer with HP Tuners software? Or do you have to have it flashed and then make the changes to the program. This is on a 97 Corvette.
Russ I try ed the car now and it does the same thing at 86 mph dropping in and out of lock-up. What does the TCC pwm do? It stays locked up in 4th with that on in the VCM controls. HELP!!
Is there a way to lock the converter at a certain speed and gear?
Tried the car today. The speedo is right on, but the converter does not lock in 4th. Its hard to tell on the dyno I need to take it down the road and try it.
Thanks Russ, I do set the speedo with a GPS. I will try the tune in the morning and let you know. I really appreciate your help. Thanks.
The trans was built by RPM to take the horsepower and I talked to them and they were not to helpfull the car has 2.73 in the rear gear. No DTC
The car is a 408cid with a supercharger at 9lb of boost cam is 500 lift. The car makes 705 horsepower and 653 torque. No stock tune. Rear tire size is P325/30 ZR19.
I have a 97 Vette with a RPM trans with a little higher than stock stall converter. My problem is when I get to 81 mph the converter drops in and out of lock-up in 4th gear. It does not matter if I...
I Purchased A Converter That Works From Staples For About $30.00 On My Vista Laptop. It Did Have To Go To The Belkin Website To Get The Right Driver, But It Does Work. If You Need More Help Call Me...
Is their ever going to be a Hp Tuners Class?
I want to see if I can lock the car in 3rd using the VCM controles. Can you help?