Search:

The tps appears to not be functioning while that anomaly is occurring...strange thing is I think the pe and ve works outside that particular spot..

I had a "n2mb" launch control box and it started...

469204692146922

469194691746918I have a strange problem that seems to mostly (only?) come up only when hot lapping at the drag strip...

Car will suddenly go dead lean and not idle all even with the iat decent and...

i did a bunch of high low lower rpm tuning and the car is definitely working better... i am such a noob, apparently i wanted RTT and upgraded to the 1 bar os... i've since deleted the maf completely...

here ya go! a track run, sorry about the length... note my wideband is going through my AC input

6600 frames or so is where the fun starts! :)

i think this is the video.. you can see me ffff...

So, I was drag racing my t56 6L Hci car with a small cam, formerly an auto car on a 98 ls computer
when i swapped the 4l60e out i put in a t56... i tossed the 98 computer and went 0411 02 camaro as...

hey mechanicman, i'm helping him tune the car, i posted that in his account..

you're probably right, that was my next question/step... the question i had was ...why is the AFR basically the same...

A ha, the map sensor isn't responding! 94 kpa all the time

Is the map sensor from the LS1 Compatible with the 0411? Seemingly they are all the same ?

40920

Yeah you are seeing the end result of me partially disabling the maf! I ran this setup with hpt and a 98 computer for the years..

Basically it seemed like the 98 maf may have been incompatible...

hello friends

87 rx7 w/ 2k4 lq4 just swapped in t56 (vss is unhooked still)

i wasted 6 credits getting this working haha... i unlocked the author of a base tunefile's vin, the v6 van vin of my...

I have an 04 lq4 in an fc rx7 4l60e 98 camaro a4 ecu (yes i know) anyways.. a kid tried stealing the ecu and i think he ruined the harness as the mount i made was broken. It was cutting out if the...

No air conditioning, yes, I am running the wideband in through there.

I'm assuming there is no work around for this as the ECU thinks that the ac thinks it's supposed to engage the compressor,...

I'm not sure, I've sprayed ether around the entire intake... maf etc... no change

I just brought up a log from last year..
3.5ms pulswidth at idle (same as it was when it was lean this year)
40...

fixed the issue, apparently the car has completely changed or something... throwing almost 30% more fuel at a tune that was already ok fixed it... maybe it was just something to do with hotter IAT's,...

switched to fan 1 output, still turning fans on randomly... lol
it wouldn't be a big deal but the lincoln mk8 fan is ridiculous lol i'vehad my temp drop to like 170f before... or never warm up, i...

oh yeah? I don't know why the previous owner decided to use output 2...THANKS MONTE !

1998 camaro a4 pcm , 04 lq4, 4l60e 87 rx7

Is there any chance that the tune file or operating system is corrupt? I don't think it's a mechanical issue...as loading an old tune seems to remedy...

here is that cfg

it was definitely the wideband turning the fans on. when i'm not tuning i just unhook them

i wonder how i should set the AC settings so it doesn't do this at all? or is that possible?

it has...

04 lq4 in an fc rx7 4l60e built with a yank billet 3600 stall, turned the "normal" torque reduction vs tq vs shift from 30 across the board down to around 20% of it's original value.. all is...

Hello friends,

I have a 98 ls1 4l60e computer in my 87 rx7 with a 04 lq4...

The electric fan is a big single wired to "fan 2" it's set to come on at 185f, I get the feeling it's worked before...

AEM buys only 1 or 2 styles of the 4 or whatever kinds of Bosch lsu 4.2 "wideband" sensors... so, they get a special resistor cut for these specs and just insert it into the harness plug instead of...

turns out it was the wbo2 input into the EGR triggering the enrichment table, i tried it on the AC circuit same deal threw off the idle etc suddenly, LOL!

after poking around for a few hours on the site, i noticed something about cat overtemp being a factor with PE... isn't this mostly just for lean cruise? i did change this value...

Note, I know that the EGR voltage is all that shows up, I am probably retarded but I couldn't seem to be able to get the EGR PID routine to show wbo2 afr on my home computer, I even copied the...