Do you mean things like the Breakpoint Multiplier, as an example? If you click on the tab to open up the table, then click on the axis label on the left hand side, it will open up the axis table...
Type: Posts; User: crakrz
Do you mean things like the Breakpoint Multiplier, as an example? If you click on the tab to open up the table, then click on the axis label on the left hand side, it will open up the axis table...
Do you have a stock file for us to compare against?
Any chance that the Toyota GSU40R 3.5 liter V6 will be supported? If I remember correctly, they have been around since about ‘07, but are still in production to this day. Must be heaps of them...
Are you sure HPT has switchable tuning options or are you thinking of a different software platform?
Have you read the stock file from your ECU first? You don't want to write over the current stock file without saving it first. And you are better off using a copy of your stock file as the template...
"It has a lot less air at 0psi than it does at 10+psi."
Yes that is an obvious math calculation. But what I was suggesting is- a diesel engine with no active throttle body restricting air is...
Why is it smoking at idle? I would have thought that it should have an over abundance of air at idle rpm's and should not smoke at all. The only time you would want extra fuel is at high demand from...
Have you tried to fully uninstall HP tuners from your PC? And I mean totally remove by "Add or Remove Programs" in your control panel. Then shut down, restart, and reinstall. Give it a try, has...
Hi Pass Time, welcome.
Just to clarify- Are you looking for assistance with tuning, someone to tune your vehicle, or something else? Do you have the HP tuners hardware and software?
Your post...
Everyone seems to have gone quiet on the 2.8 diesel. How is everyone going with these? Anyone upgraded their turbo yet?
I'm at a bit over 220 hp at the wheels, but pretty much hit peak airflow at...
Mine is the earlier Bosch ECU, not the E98, but the same turbo and intercooler. It can easily maintain 300kpa (30psi boost) past 3200 rpm. It's just not very efficient at that point. The turbo is...
What year is yours?
Just looking at the Graph you plotted, do you actually know that it's plotting fuel rate? I am only asking as we can't see much on the screen shot. Is it possible that the figures you are seeing is...
Currently running 30 psi. Plenty of air to keep everything cool at that level. I had to upgrade my clamps at 26psi. Hoses were creeping.
Did it myself. Previous experience tuning my own Holden and Ford V8's, so just had to get my head around diesel tuning. Not hard, once I understood the engine dynamics.
My ute is weighing in at 2650 kg, and just doing the daily slog around the eastern suburbs of Melbourne, it is returning average figures of 9.2 lt/100km. (measured at bowser, not trip computer) When...
Is this your vehicle or a customers? What year is it? Man or Auto? Good to hear you are seeing positive results. They are a great engine and can be pushed a fair way if driven sensibly. I have had to...
One other option for you is to physically block the EGR path, eg, plate or similar, then disable the P0401 DTC in the software. But in the meantime, you could probably send "stevo" from VCM a pm and...
The results with these engines are very good. You can get plenty of air and fuel into them. Turbo is the first limiting factor, but you will be over 150kw/200hp at the wheels before this gives you...
Where are you based? Pretty sure the US based vehicles won't allow disabling the emissions functions.
Hi IXR08,
My RG Colorado is a 2012 model, LTZ 5spd manual. I started the mods as soon as left the showroom. Blocked EGR, bigger intercooler, 3" stainless exhaust, cat delete, open CCV, 2" lift,...
Hi All,
Brand new to HP Tuners today. Can start tuning my Aussie 2012 Holden RG Colorado 2.8 baby duramax now. Always had Fords before, so my only previous tuning experiences have been with SCT and...
Hi All,
I am new to HP Tuners, just purchased my kit today to start tuning my 2012 Rg Colorado. I will be following this thread with interest, but is there a specific area on the forum for these...