Search:

Type: Posts; User: Tadias48

Page 1 of 3 1 2 3

Search: Search took 0.00 seconds.

  1. you will need to add a lot more pids to your...

    you will need to add a lot more pids to your channels to really see what your car is doing. add your mapped points. ebt torque etc torque and all your sources.
  2. Replies
    2
    Views
    93

    performancemrp.com has really good quality maf...

    performancemrp.com has really good quality maf housings. and they range all the way up to 5 inch. just order the silicone coupler reducers and you'll be good to go.
  3. do these raptors lack tables for combustion...

    do these raptors lack tables for combustion stability? im getting a driver demand source of combustion stability limit in a 14 6.2 with a whipple and it shuts the tb when I go wot at 3k and wont...
  4. Replies
    9
    Views
    261

    Ok I removed the stereo and fuses and it worked....

    Ok I removed the stereo and fuses and it worked. It wrote the entire file. Now I'm going back to the stock computer and trying it. I appreciate the help from everyone
  5. Replies
    9
    Views
    261

    I will try that right now when I get to the shop....

    I will try that right now when I get to the shop. It's a 6.0 swap with stage 1 cam the previous tuner had the transmission pressures too high and keeps blowing them. Hes been through 3 already so he...
  6. Replies
    9
    Views
    261

    Yes the file gets pulled with No issues its...

    Yes the file gets pulled with No issues its always the write process that fails. I will pull the radio apart tomorrow and the chime adapter as well and see how it does. I appreciate the input.
  7. Replies
    9
    Views
    261

    Its an 05. And I think it's the aftermarket...

    Its an 05. And I think it's the aftermarket stereo that's bricking the ecms. Like I said its going to be the third one to do fail and completely blank out the ECM because of it. It finishes the erase...
  8. Replies
    9
    Views
    261

    vin/vats swap bricked

    I'm working on a clients truck and I haven't been able to do a successful flash. the computers keep timing out halfway through the write. I contacted support as ive been struggling since Friday with...
  9. Thread: Tundra

    by Tadias48
    Replies
    39
    Views
    4,209

    I started another thread where I was dyno tuning...

    I started another thread where I was dyno tuning my tundra. The sweet spot for my 87/91 blend was 84 lambda. I didnt gain more power from leaning it to 85-87 and it wasn't taking any timing. I'm...
  10. Replies
    1
    Views
    77

    14 srt8 grand cherokee license

    so I have a grand Cherokee srt8 that I tuned a while back. but the customer only wanted the engine tuned back then. now hes back for the tranny tune but when I read both the tcm and ecm its asking...
  11. Thread: 2012 tundra

    by Tadias48
    Replies
    2
    Views
    317

    so with 9 gallons of 87 and the rest 91 I tapped...

    so with 9 gallons of 87 and the rest 91 I tapped out at max power of 365 and with colder iats. with a lambda of .84 I still need to work on the tune but I will leave it at that until I can get a full...
  12. Thread: 2012 tundra

    by Tadias48
    Replies
    2
    Views
    317

    at 86-88 lambda the kr feedback started adjusting...

    at 86-88 lambda the kr feedback started adjusting from -3 to -4 timing was at 26 wot and dropped to 23.5. following the same timing I'm commanding and actually and additional degree from commanded. I...
  13. Thread: 2012 tundra

    by Tadias48
    Replies
    2
    Views
    317

    2012 tundra

    So im finally getting around to tuning my tundra. its a 2012 with jba longtubes an injen intake and 2.5 magnaflow dual in dual out exhaust.
    this pull was done with the stock tundra tune off hp...
  14. Replies
    5
    Views
    251

    on a stage 2 you shouldn't have too hard of a...

    on a stage 2 you shouldn't have too hard of a time getting it dialed in. depending on the cam lift and duration you want to bump up idle timing until you reach peak map pressure my cam cars I have...
  15. Thread: 2016 malibu

    by Tadias48
    Replies
    10
    Views
    319

    Yeah I lowered dd and got an extra lb of boost...

    Yeah I lowered dd and got an extra lb of boost maxing out at 21.6 lbs and tapered down to 18 mat temps were climbing so I left it at that. I leaned it out to 83 lambda and the kr went away. Overall...
  16. Replies
    25
    Views
    1,004

    correct that's why I increased it partially....

    correct that's why I increased it partially. mainly to firm it up but also not have that super firm neck snapping feel. I like to have a little bit of comfort. and it feels great at just a 25%...
  17. Thread: 2016 malibu

    by Tadias48
    Replies
    10
    Views
    319

    so I got 22lbs downlow but it still keeps...

    so I got 22lbs downlow but it still keeps dropping to 16 at higher rpms. I belive the DD is vss based so at higher speeds the commanded tq is less. wish it was rpm based to be able to go over more...
  18. Thread: 2016 malibu

    by Tadias48
    Replies
    10
    Views
    319

    yeah I know so I couldn't dyno tune it. it kept...

    yeah I know so I couldn't dyno tune it. it kept down shifting so im doing a street tune right now. I'm just stumped on the DD tables. I don't understand those values as to why they're so high. ive...
  19. Thread: 2016 malibu

    by Tadias48
    Replies
    10
    Views
    319

    the other thing that is tripping me out is the...

    the other thing that is tripping me out is the VVE tables they are all over the place. might just run it straight maf. 87591
  20. Thread: 2016 malibu

    by Tadias48
    Replies
    10
    Views
    319

    I haven't found anything for the auto stop start...

    I haven't found anything for the auto stop start feature. and yes the damn car fuel system wont go into PE but since it has widebands it does command the richer lambda which so far is working. I'm...
  21. Replies
    25
    Views
    1,004

    I was talking about the pressure duty cycle table...

    I was talking about the pressure duty cycle table ecm46102-46107
    and the power request I think is just a way to sensitize the pedal a little more. I personally didn't mess with that table but its...
  22. Thread: 2016 malibu

    by Tadias48
    Replies
    10
    Views
    319

    2016 malibu

    have any of you guys messed with a 2016 malibu 2.0T? its not listed under the vehicle supported list but for some reason it let me license it and make some changes.
    attached is the stock file....
  23. Replies
    25
    Views
    1,004

    I loved it I left part throttle Duty cycle at...

    I loved it I left part throttle Duty cycle at just 1.25 higher than stock and wot I went full. so its smooth downlow and at wot it has a good push to it. customer should be happy. I appreciate all...
  24. Replies
    10
    Views
    449

    No problem I sent you a PM with more things you...

    No problem I sent you a PM with more things you can do to your tune.
  25. Replies
    25
    Views
    1,004

    Figured it out. I kept hitting the tcc lock right...

    Figured it out. I kept hitting the tcc lock right before the 2-3 shift I just raised the apply speed to 2200+ and it solved it.
Results 1 to 25 of 68
Page 1 of 3 1 2 3