anyone with any experience here please give me a shout out. I really need to get this thing done
Type: Posts; User: Globalgtr26
anyone with any experience here please give me a shout out. I really need to get this thing done
Have a 2016 ZL1 with a lot of goodies on I,
1050xID injectors.
both crank and snout pulleys
full header back exhaust.
DW300c twin pumps
PROBLEM>>>>>>>>
I'm still dialing in fuel trims........
Anyone else? have any input. I have rescaled the injectors and fuel maps and pulled peak timing to a general safe level. I honestly do not really know what im doing here as this is my first LS tune...
Update. I have gone through the wiring and replaced both 02 sensors to verify, wiring is good. this is a 3 plug pcm…. I have read about horror stories with this PCM vs the 2 plug.
NEED SOM HELP HERE.
So I inherited this wonderful POS. Im not really a LS tuner with HPT and have tuned R35's and stand alone Import and dodge most of my career all the ls's I have ever done has...
5.0 gen 2 in a 98 MUSTANG GT.
ford performance control pack manual transmission #m-6017-m50a /504v 5.0l). HP tuners will not see any Vin (because there isn't one on the power pack ecus) I can...
No just the Map area. in the last data log I noticed that as soon I hit 29psi the throttle would close. All the other areas were set up for 19psi + my baro. so it was limiting throttle to control...
found it everyone it was in the combustion stability map.
here is the last Data log. 500ftlbs torque 462whp now this is on a MD500 DYNO.... I get 220 kpa but then the throttle plate pulls it back down. I'm assuming I still have a limiter some where this is...
just adjusted this by 15% and still same outcome
better scaled data log. our baro is 97kpa.
did you ever get this figured out? I'm having the same issues. throttle plate closing, cant bring boost up
2018 raptor
Fullrace Intercooler
Tial BOV
Throttle body spacer
full exhaust "corsa"
air raid intake
Ive managed to bring power up to 483tq 436hp.
having issues with boost control and...
I'm currently at 463wtq 436whp @ 174kpa. on a MD500 dyno fighting the throttle plate and boost control now
Got the car driving well, pulling well, but I'm watching it lean out at the top end. Injector duty cycle is low. I notice in the software fuel mass multipliers and in there is pump flow pressure...
thanks... looking forward to your reply dm me if necessary
got it taken care of.
I have certain values I desperately need....
****TPS,
****VAC/BOOST----(I have been having to convert kpa.. time consuming)
****General 02 reading from the factory (Sensor 1's).
Nothing I have...
ok thanks, Do i have to do this plugged in or can I modify my Scanner and change the PID to read what I need off a saved File
Just wanted to introduce my self.
Im planning on taking the school ASAP.
My employer has decided to start pushing HP tuners aggressively, And I was told to get my feet wet....(what he actually...
Quick ADD..... Is HPTUNERS able to LIVETUNE Dodge??? this datalog, adjust, reflash, datalog thing is killing me!!!!
Hey guys,
Im a new to HPtuners.
I searched the forum first.. i have found alot of detailed info on the boosted 6.4 hemi tuning but cant seem to find what im looking for...
I have...