I checked the Netframework, my system already had the newest version.
Type: Posts; User: carzan
I checked the Netframework, my system already had the newest version.
I don't have a bench harness.
After a number of attempts, I was able to do a low speed read.
Have no problem with doing a scan/datalog
2005 GM 5.3L P59 ecm
What puzzles me is things worked...
New laptop running Windows 10
VCM editor version 4.8.7
have done a resync on interface
Begins reads, reaches 6% then halts and times out ...read failed.
Problem with interface???
After updating the VCM Editor from 4.0.12 to the current version I was able to Resync the interface and acquire the credits.
thanks
Just purchased credits to do another vehicle.
When I do a Resync Interface the following is displayed "Client Version Not Supported"
What gives???
What tuner OS have this sorted out?
I'm have the same issue, all the inputs are wired and working correctly. Simply won't engage.
'05 5.3 DBW swapped into car with 25" tires and 3.5 axle ratio....
How does one reset the LTFTs?
I found a couple of threads with similar issue.
They talk about changing the BRAF table. I cannot find an acronym list that indicates what BRAF refers to.
BRAF = ???
thanks in advance for...
I too am having similar issues. Also looking for service number that supports DBW, electric fans and +12V AC request.
I have 12V request going into green pin 17.
green pin 55 grounded.
Analog ...
That's good news. Some where I had read that it wouldn't start or run without the body control unit, which I don't have.
Thanks for the tip on the secondary O2's
I'm trying to keep things simple,...
I'm doing an engine swap and will be using a 2005 5.3 L33 engine and a 4L60e trans. Will I need more than just the ecu and engine wire harness from donor vehicle ... are there other "black boxes/...