Search:

Yea, 1 quart in a tank full. It helped my start up issues along with initial white smoke on start up I was experiencing.

With that said, 2 days ago, I had 3 injectors die on me.....all 3...

To me that seems like TOO much but I dunno....

Might have to pull the lift pump fuse. I had a problem a time or two until I started pulled the fuse while loading.

Thank you for the reply and I'm sure a large amount of us 03-05 guys would enjoy a switchable tune on the fly setup like 06-current vehicle enjoy with EFI Live. Please keep us in mind and thanks for...

So basically you swapped filters, topped the new filter to the top with ATF, and ran it?

I heard sometime back of a possible 3 position switch on the fly being tested. Has anyone heard anymore on anything upcoming?? Maybe HPT can give some feedback on this subject.

Completely filled it up? Man I would think that would be too much at once. Might be something to consider when the fuel filter is changed. Good info man

I used the Walmart brand ATF. I seen that people were putting one quart in a full tank of fuel and decided to up the rate to a quart and a half to a full tank. It took about one full tank and the...

I ran ATF through mine when I had bad rates in 2 injectors and solved my problem....just saying it has been proven and I myself have been successful with ATF ....never say never.

I seen this post a few weeks back and didn't read it due to it concerning the duramax. I did read it this time and according to it, if you have anything beside a stock tune loaded while checking it...

So based off your experience and my input on this so far, what do you make of it. I just find it strange how a good known injector goes south just by swapping spots. I've also took a thermal gun...

I believe what you have to say here. I've heard talk about the companion cylinder but not alot on what effects either positive or negative that it may have. I swapped a good known injector to what...

According to the VCM Suite balance rate scanner, I had a injector acting up in cylinder #5 and the scanner showed it being a +4. Truck didn't white smoke or run rough at all but figured I'd play it...

Would you mind to elaborate on what a "dead injector" is? I'm curious because I myself have 2 injectors.........#3 & #4 which were initially logged at +4 & -4 respectively. It appears as one is...

That was my problem. Followed steps to Installl drivers and that allowed everything to work. Thanks again!

Thanks! I looked into it a little more lastnight and I'm thinking that's the issue currently. Moving that direction for now.

I just recieved my hp tuner suite today. I'm pretty excited to say the least. I have a 05 dodge with the cummins. I'm using Firepunk as a tuner to start off. So I have followed directions all the...