Seriously looking for a Econ tune for the sonic...going to be running 2k miles in the next few days, would love to see what it's capable of. The performance tune I snagged from the cruze didn't seem...
Type: Posts; User: jrcmlc
Seriously looking for a Econ tune for the sonic...going to be running 2k miles in the next few days, would love to see what it's capable of. The performance tune I snagged from the cruze didn't seem...
I'd be interested to see your file. I assume you were using the dash to tell you the MPG since it was such a short distance, you wouldn't have been able to hand figure it right? My dash was wildly...
I have one of the performance cruze files and it's interesting, but I'm really looking for a super mpg one to work from...
Does someone want to share a mpg or a performance tune with me so I have a starting point? I'm familiar with the 11 ctsv and diesel stuff, but this turbo/new ecu setup is all greek. I'm running a...
Wanted to revive this since the Sonic is supported now....and I just bought one. :-)
Anyone have a good starter file for MPG on a sonic turbo I can look at? Nothing in the repository....
PM...
So is the 2013 Sonic Turbo supported for tuning now?
It doesn't look like this is straightforward in the.tranny tables.
Do.you have an example I can look at?
I'd like to use the fixed export, but with the newer (and newest) betas the features I need for diesels are not there, so I'm hosed and have to continue to use the old version and be hosed with the...
I'm fairly sure there is no way to actually lock the allison into 4th gear like you can some of the other transmissions, but I wonder if there is a back door way to do it, via shift points in the...
I can have a friend re-flash the truck at the dealership if that would be advisable before moving forward...? (assuming his has the same tables as the demo file I got from the repos)
JC
LOL
Here it is, it's just a stock file I pulled from the repos from an identical vehicle.
JC
It only has desired boost egr off, no "on" table. I'll check it for the 5th gear disable...that's a good idea.
JC
The 15k lbs was a huge surprise to me, and I put off his project until I could pick a couple folks brains.
On the Lb7 boost table, are we talking about "desired boost max vs. baro vs. rpm?
If...
Well, after talking to him, he DOES want to put exhaust and an EGT in, which is great news...BUT, he also tells me he's sometimes pulling 15k lbs with it....
What are your thoughts on that as far...
I bet he would like the idea of 5% in the low tps levels and 10% in the higher tps areas...that way it feels peppy all of the time and progressively more peppy the more pedal you give it. Probably...
LOL. Customer=Cheapass friend. :-)
10% in the PW table and the pilot pw table acceptable and leave the fuel/tps alone?
JC
Good. I intended to use mecanicman's calculator and use the 50% calculator. I downloaded some other folks different tunes for this truck and they have modified tables that I don't understand, such...
In engine, tq management, general, do the tq limits listed have any real bearing on anything...does it use these? If so, is there a high limit I should adhere to if I raise them a bit?
JC
I _KNOW_ this guy is never going to put a pyro in it, but I was thinking 10% would pretty safe.
The "max boost" table in the stock form is already set to 255kpa all the way across 1400-4800, only...
Thanks, yes, Engine, fuel, diesel, Base fuel quantity, base qty vs tps.
Could I do 1600 rpm x 40% tps and add a certain % to anything above that range? Suggestions on how much %?
What about...
I'm having a brain fart on this, can you point me to the table directly so I can be sure I'm on the right track? I think the only ones I've done were newer and didn't need to be adjusted this way.
...
There is also no "driver demand" or pedal position vs torque to increase the TPS values...are they located someplace else or ? Is there another table to modify in place of this and if so, are there...
I downloaded a stock file to look at.
Under engine, tq management, general it has a max tq as well as a tf case max and front halfshaft and front propshaft max, then a rear axle max and a rear...
I've gotten pretty familiar with the procedure for LBZ-LMM and learned quite a bit, but I was hoping to find a similar how-to for the older trucks that have LB7's.
Is there such a how-to, or...
They are fixing my licensing issue, and the tune for the truck seems to be good...will know more in the coming weeks.
Joe