Search:

Type: Posts; User: veeefour

Page 1 of 20 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    5
    Views
    96

    No they won't provide you anything, asked many...

    No they won't provide you anything, asked many times that's why you should stay away from their shit.
  2. Yeah I use lyrics...

    Yeah I use lyrics...
  3. It has right on the graph pic. ...

    It has right on the graph pic.

    https://www.aemelectronics.com/files/instructions/30-2131-30%20Sensor%20Data.pdf
  4. Not sure which parameter has a priority and comes...

    Not sure which parameter has a priority and comes into equation first but there are 3: ISS, OSS and Gear ratio.
  5. Nope, RPM is not taken into consideration besides...

    Nope, RPM is not taken into consideration besides anticipation logic.

    OSS = turbine speed(ISS-inpust speed shaft)/gear ratio
  6. I never disable torque reductions. Spark cut is...

    I never disable torque reductions. Spark cut is present in those shifts.
  7. post your stock tune

    post your stock tune
  8. Increase clutch fill time and report back.

    Increase clutch fill time and report back.
  9. 1-2 shift will always short shift - as mentioned...

    1-2 shift will always short shift - as mentioned it's due the nature of unlocked TCC plus tall 1st gear ratio. There are ways to fix this.
  10. You need a transfer function for your MAP sensor....

    You need a transfer function for your MAP sensor. If you are doing it for a first time make sure you grab a sensor that comes with data - just like with injectors you can guesstimate a lot but...
    ...
  11. Replies
    97
    Views
    15,257

    Torque model follows your torque input and checks...

    Torque model follows your torque input and checks for plausibility - your torque input comes from several different places Driver Demand being the most important.

    Basically speaking: if you...
  12. Use A/C sensor as in input, or IMRC position...

    Use A/C sensor as in input, or IMRC position sensors if you have those removed.
  13. Try to play with converter lock-up rate for...

    Try to play with converter lock-up rate for example and see if WOT shits are affected by any means.
  14. A lot of things can slow the WOT response, over...

    A lot of things can slow the WOT response, over shoot or short shift - tip in logic is a PITA for example.

    WOT table has to be adjusted to OSS - one will not work without another. RPM anticipation...
  15. WOT shift tables works as advertised but they...

    WOT shift tables works as advertised but they need to be adjusted correctly.

    It all depend on what you have in your OSS shift schedule.
  16. Replies
    6
    Views
    1,375

    Guess not...

    Guess not...
  17. Replies
    7
    Views
    184

    Automatic PCM can be switched to Manual with no...

    Automatic PCM can be switched to Manual with no problem - you don't need a second ECU. The other way around is a different story.
  18. Hi Chirs :)

    Hi Chirs :)
  19. Your speed density and your torque model are not...

    Your speed density and your torque model are not ready for boost - you fuel system has FAULT that is why it does not enter Power Enrichment.
  20. Replies
    22
    Views
    766

    Those micro records oh boy...

    Those micro records oh boy...
  21. You were not pushing the pedal all the way in -...

    You were not pushing the pedal all the way in - it has some hysteresis and keeping it gently around 70% might cause OP to disable.
  22. I have big Hiroshima hairdryers but with ceramic...

    I have big Hiroshima hairdryers but with ceramic bearings and they spools quite fast - was thinking the same, turbo is too big can't spool fast enough.
    But no, I tried with smaller turbos and with...
  23. I have those turbo tunes done like 95% drives...

    I have those turbo tunes done like 95% drives like stock but once in a while I have that "detonation tip in limit" in torque source at WOT - mostly while launching from a dig.
    Setting Tip-in logic...
  24. Replies
    6
    Views
    1,375

    Will Expander Hub ever come to fruition? I need...

    Will Expander Hub ever come to fruition? I need more than 2 inputs already.
  25. On how much this can be learned - I believe you...

    On how much this can be learned - I believe you mean this. It can range form 150 to 400%. Reducing it helps with oscillations as mentioned but it's only a band aid.
    94717

    I have a 4 bar sensor...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4