Search:

Appreciate the fix, If you don't mind letting me know based on what were the changes made ?

I noticed that MAF,VVE, Idle rpm, airflow minimum, oxygen sensor > (Mode vs. Airflow) had changes made...

I finally decided to give the MAF + VVE a try and would like to get your opinions if I did the maths correct or may have missed something, I know the log should be at steady state throttle but I just...

during the MAF curve tuning, specifically when I hang the the rpm for some time, the Lambda just jumps full lean mode and skews the written data and would not go back to normal unless I floored it...

Yes, I was referring to the WB as the AFR, Couldn't hook it up after the (Electric muffler - https://xforceusa.com/products/vmk11-350/ ) as there is no proper space to fix the lambda sensor. I also...

So I have been working on tuning the VVE whenever I get the chance and so far the car drives much better but I am still in the process of VVE tuning, Every revision fixes the cells to stoich for...

current Bore & Stroke

Pistons are 4.080
rods are 6.125
Crank is 4.100

thanks

Hello All,

I have been taking my time learning and trying to tune my car which is swapped with a stroked LS3 10.5:1 CR, Ported Heads, BTR STG3 NA +400ci camshaft.

Car has been previously tuned...

I got the car to Idle perfectly and found the best smoothest Idle to be around 9.5 g/s around 22 and 24 degrees of spark. however it just won't drop to my target Idle, I have tried targeting idle on...

I am currently working on a 2020 GT500 and would like to get some input.

I made a base tune and started up the car and something seems off, First of all the AFR banks read around %30 in difference...

are there any tuning books or courses out there for the new engines and 8 speed trans ?

takes a second or 2 on cold engine, but starts up fine on warm engine..

I used a stock cam gear but shifted from single bolt to 3 bolts.

Yes sir, Everything was installed correctly and double checked.

I recently installed a CAI, L/T's and a camshaft (Comp Cams LSx Camshaft - 212/218 .558'/.563' 115LSA) Which should be enough for street Use. I have remote tuned the Vehicle and it drives fine and...