Okay, the tcm/ecm does have the matching TB / pedal setup. It shifts perfectly just will not kickdown. However it is throwing misfire codes which is a stock engine no aftermarket cam, but it is not...
Type: Posts; User: JamieHicks18
Okay, the tcm/ecm does have the matching TB / pedal setup. It shifts perfectly just will not kickdown. However it is throwing misfire codes which is a stock engine no aftermarket cam, but it is not...
Do you know what the speed output type settings should be set to? Right now have them set to serial. And can early. Didn't have a clue what was correct since there are no wheel speed sensors.
https://forum.hptuners.com/showthread.php?99695-4L60E-Downshift-(Kickdown)-issue
Anyone familar with this issue? OS Issue?
I am having an issue with the following swap. 1949 Cadillac
2012 Corvette ls3 (E38) , with a 13 pin 4L60e with a T42 . 29.3 tall tire with a 3.50 gear ratio. 2 problems, mph is off by about 15...
Okay thanks for the reply. Will try. I do have a wideband just need to get it installed. Fuel pressure is good and holding steady.
Can someone point me in the correct direction. My engine shows thru a DTC code that Bank 1 is at +25 and is running too lean however plugs show rich. Also, Bank 2 is intermittent to running +25. Have...