Search:

Type: Posts; User: Jonblarc7

Page 1 of 3 1 2 3

Search: Search took 0.00 seconds.

  1. No offence taken, I'm all ears. I hope to...

    No offence taken, I'm all ears. I hope to purchase the Greg Banish stuff. Right now I'm just try to read as much as possible and watching you tube clips like GOAT ROPE. I'll move the time line up...
  2. Here is the VE table 94155

    Here is the VE table

    94155
  3. I think my tuner got the MAF and VE pretty good...

    I think my tuner got the MAF and VE pretty good for not having a wideband and just remote tuning it. It's just some small things like the failing to crank when it's warm.

    Plus I'm really trying...
  4. Does the AEM 30-0310 have a serial out? I have...

    Does the AEM 30-0310 have a serial out? I have HPtuner standard so I was going to go with the AEM guage that plugs into the OBD or find one with a serial out so I could plug it directly into my...
  5. Thanks I will do that. I was trying to put off...

    Thanks I will do that. I was trying to put off LT headers and a catless y pipe until Christmas. I was going to add my wideband then instead of adding a bung to the stock exhaust. But I may push...
  6. Something like this 94143

    Something like this

    94143
  7. Should I take out 10% in the 700 and 800 then...

    Should I take out 10% in the 700 and 800 then extrapolate?
  8. Your talking about the External Load table under...

    Your talking about the External Load table under Idle Torque limit?

    I'm guess since I have a bigger cam I need to lower my Torque limits in the 700 rpm range then extrapolate up and down?
  9. I found Base Running Airflow but can't Idle...

    I found Base Running Airflow

    but can't Idle Torque tables under Idle tab.

    How should I adjust the Running Airflow table?
  10. I have the TSP stage 2 218/226 with 32% over fuel...

    I have the TSP stage 2 218/226 with 32% over fuel lob in my L86. If the engine is cold it has no problem starting. But if it is warm and I cut it off to run in somewhere and walk right back out to...
  11. Replies
    8
    Views
    248

    I fired it up tonight and let it idol for about...

    I fired it up tonight and let it idol for about 10 mins until the temp got up to 140 or so. It sounded fine, so I think I got the seals back in right. But we will see, last time I thought I had...
  12. Replies
    8
    Views
    248

    I ended up doing it this way. They are much...

    I ended up doing it this way. They are much better but still not perfect. I saw another video where a guy heated them up to get them to shrink down

    https://youtu.be/htLtikGBjFA
  13. Replies
    8
    Views
    248

    Looks like I popped the seal on number 8. These...

    Looks like I popped the seal on number 8. These DI seals are such a pain in the ass to get them to slide into the hole correctly.

    I can?t get the pic to down load from my phone.
  14. Replies
    8
    Views
    248

    Sure didn?t and now I realize my mistake

    Sure didn?t and now I realize my mistake
  15. I'm having the same problem same cam but L86. It...

    I'm having the same problem same cam but L86. It seems to happen more when I remote start the truck while it's still warm.
  16. Replies
    8
    Views
    248

    STFT and blow injector seal

    Would blowing out an injector seal or seals cause the STFT to change this much and go lean from one drive this morning. The two other drives around town during lunch. I mean if it did would it kind...
  17. Replies
    9
    Views
    304

    After doing some research from good old google. ...

    After doing some research from good old google. I just found that out. I just can't figure out if I have it on the right gasket on the right side now.

    How big of an exhaust leak would it take to...
  18. Replies
    9
    Views
    304

    Here is the passenger side 93262

    Here is the passenger side

    93262
  19. Replies
    9
    Views
    304

    You can see in the pictures the the drivers side...

    You can see in the pictures the the drivers side has a gap in between the two flanges because it has a gasket in between them. THe passenger side the two flanges sit flush with each other because I...
  20. Replies
    9
    Views
    304

    So I was looking over the exhaust last night and...

    So I was looking over the exhaust last night and I?m not sure how I missed this. Because I did the heads and cam my self. But I very removed the exhaust manifold on the passenger side. But if you...
  21. Replies
    9
    Views
    304

    Also and I'm just asking because I'm not that...

    Also and I'm just asking because I'm not that familiar with this DI engine. If I did have a High Pressure fuel leak wouldn't it bleed off PSI in the log after I shut off the engine. It seems to...
  22. Replies
    9
    Views
    304

    I took the intake off and didn?t see anything at...

    I took the intake off and didn?t see anything at all. All the fittings where tight and no signs of a leak. The smell seems to be much worse on E85 but with 93 in the tank like I have now I don?t...
  23. Replies
    9
    Views
    304

    Help with a P219B code

    I'm trying not to both my tuner again with another code popping up. I keep getting a P219B

    I have a 2014 L86, cam 218/226 TSP.

    My gas mileage has dropped 3 or 4 mpg in the last week. I'm...
  24. do you smooth that graph after you make those...

    do you smooth that graph after you make those adjustments
  25. This is the video on adding the sensor ...

    This is the video on adding the sensor

    https://youtu.be/ezb58gNGJRk
Results 1 to 25 of 54
Page 1 of 3 1 2 3