Search:

Gotta get your name out there guys, right now just about everybody uses the Predator or SCT, 10% the functionality at the same price. V6 handheld tuners go for $600+. You (or somebody) should contact...

Bill-

I will have you a V6 2008 tune by the end of the week. I did the beta on the GM 2.4 I4, I'd love to participate on the beta for the V6 Mustang.

Wrong press release link in the email (and the first link on the home page), but I still love ya :)

Do you have the specfic error that pops up?

It has to be in the table display for it to work.

Which pins are you using for what? Which ones did you hook the Wideband signal into, and which did you hook the ground to? Did you configure the wideband on the table display?

Do you have the wideband correctly hooked up to the EIO?

He could copy the tables out. Basically its to prevent mail-order tuning, a tuner could edit and save all the tunes they want, charge for them, and have somebody with the HPT cable flash it. This is...

It may only be raising the code during programming when the ECU is too busy dealing with the data from HPT. Try clearing the code and if it doesn't come back between programming, then I wouldn't...

SDM = Sensing and Diagnostic Module, basically the airbag module.

Did the 99 even have a BCM?

Bad O2 sensor?

Which PCM?

You must connect the scanner to the car with the computer at least once, then you set up the PID's that you want to log in the table view, go to Scan > MVPI Pro Datalogging and hit Write Config. It...

http://www.hptuners.com/forum/showthread.php?t=803&highlight=acronym

Did you write the configuration to the cable? Do you have any unsupported parameters in the table view?

Not the VCM editor part, the scanner part, and was your car the last car that you had connected to with the scanner?

Have you connected the scanner to the car at least once on that computer?

http://www.car-part.com to search junkyards all over the US.

Well...

The High Octane table doesn't have anything to do with the octane gas in your tank. The ECU favors the high octane table when the vehicle doesn't encounter any knock. When it encounters...

Issue was?

Check the cigarette lighter fuse

Yes it does. This signifies the amount of air the engine can take in versus the volume of the engine. The goal of the VE table is to have the VE numbers so that you have your target A/F ratio. The...

Yeah, 6600 is the stock value, 65535 is the maximum you can set it to, which effectively disables it.

I had an auto, but yeah, now I have a 5 speed.