bump.. same question
Type: Posts; User: rgaum12
bump.. same question
Did you ever find one?
Nobody has anything?
Looking for a either a custom tuned roush supercharged raptor 6.2 or the factory roush supercharged tune. Had a vehicle flashed at ford and lost the tune I had on it.. Thanks in advance!
Are you willing to share this tune file? I just lost my Roush tune due to ford screwing up.. would be a huge help!
Anyone have a stock file for a 2012 GT-R?
Thank you
OEM MAF
Siemens EV6 60lb injectors.. do I have the right data in here for them?
Does anyone have a tune for a ford 6.2 (raptor) with a Procharger on it? MAF sensor at throttle body.
Thanks!
Startup AFR looks good but after about 30 seconds it slows down as normal but AFR drops like crazy. Ford F150 Raptor 6.2 V8 with Procharger
Tune and log attached
94328
94329
Did you ever get a finalized tune file for this?
Completing an engine swap on a 2010 f150. It had a 5.4 and I am swapping the 2010 6.2 into it. Engine is in place and wired up. There is communication between the body of the truck and the new...
bringing back an old thread. @eric@hptuners, did we ever get the ability disable PATS in the copperhead ecu's for early 6.2/5.4's?
Nobody?! :(
Hi Guys,
I am in desperate need for a 2010 F150 Raptor 6.2 stock or modified tune. Just needs to be 2010 as the ECU changed in 2011. Thanks!!
post your tune!
bump
Did you ever get ahold of one of these files? I need it as well
Could someone please give me a little guidance on this? It seems my scheduled torque error is maxed out already and still getting the code.
I understand that but the error is already maxed out at 10,000?
Nobody?!
Hi there,
I am getting a random P061B code (torque management). My scheduled torque max is raised up to 10,000 but still goes into limp mode sometimes. Tune is attached. Any ideas?
Thank you....
Hi everyone,
I do not have any startup sections under airflow for my ECM unfortunately. Right now when I start the engine under ~160*F it flares to over 2,000rpm, which is stupid loud with...
Ok here is a log with your graph.
First pull didn't even go open loop. Seems like its on the 2nd gear pulls when RPM's spike quickly. Other pulls are 3rd gear.
ok so now it sometimes goes into closed loop and the back into open shortly after.. occurs at 8:12:49 on log.
log and updated tune attached. appreciate the help.
76677
76678
ok I swapped the torque tables with the roush tables supplied by 2000mcr.
also increased MAX MAP to 30 psi.
What do you think?