Search:

Type: Posts; User: trdtoy

Page 1 of 3 1 2 3

Search: Search took 0.00 seconds.

  1. Yes, OEM O2 sensor Need better pictures of...

    Yes, OEM O2 sensor

    Need better pictures of plugs or really just better plugs instead of using those. HKS M45XL or NGK R2556G-9 at .028"
  2. Sounds like a crank sensor issue if it cut off. ...

    Sounds like a crank sensor issue if it cut off.

    The blip to 2.0 lambda is not the fuel line I would not think as the rail pressure was good the whole time. Generally the fuel line issue you will...
  3. Looking at the log the lambda measurement read...

    Looking at the log the lambda measurement read 2.0 for a bit while commanded was still where it should be. Leads me to believe it's intermitent o2 sensor or fuel system related issues.

    On a side...
  4. Have not looked at the log but this is classic...

    Have not looked at the log but this is classic fuel line issue on these cars from what you describe.
  5. Replies
    11
    Views
    2,251

    I would think a scan tool to tell you the...

    I would think a scan tool to tell you the calibration on the ecu and/or looking on the ecu itself that HPT may be able to tell you if supported or not. That is ofcourse if the ecu has not been tuned...
  6. Replies
    2
    Views
    319

    What ecu does it use?

    What ecu does it use?
  7. Replies
    12
    Views
    776

    Screw requests, worry about safety. And 24 psi on...

    Screw requests, worry about safety. And 24 psi on 93 + meth is not safe on a 13 really unless highly modded which this car is not. 24 psi is not even great on a stock turbo either especially up top.
  8. Replies
    12
    Views
    776

    Not sure what mods you have exactly due to...

    Not sure what mods you have exactly due to generic listing but especially on a 13 on 93 you do not need to push that much boost anyway. You also want the least boost spike possible to live a longer...
  9. Replies
    12
    Views
    776

    DC% changes are not needed at all to increase...

    DC% changes are not needed at all to increase boost. I can't view the file myself at the moment but if you're having difficulty then chances are you're not familiar with anything in regards to...
  10. Replies
    6
    Views
    922

    Tire is not my issue, suspension is, which is...

    Tire is not my issue, suspension is, which is being taken care of on 5/5. :-)
  11. Replies
    6
    Views
    922

    So traction was limited on the 225 all season...

    So traction was limited on the 225 all season tires and stock suspension but on the last tune it did 13.421 @ 105.57 MPH on E80 fuel! To make it even better I had no weight reduction, not near FBO,...
  12. Replies
    6
    Views
    922

    Not sure where power is at but on E80 tested fuel...

    Not sure where power is at but on E80 tested fuel with 18-20 psi stock turbo and not even FBO 40-80 mph in 3rd gear comes in less than 4 seconds! And I get tire spin at 40 mph trying to make the...
  13. Thread: Bricked Pcm?

    by trdtoy
    Replies
    22
    Views
    1,522

    Glad it's working! Now back to tuning! ;-)

    Glad it's working! Now back to tuning! ;-)
  14. Replies
    6
    Views
    922

    Tune for E60 fuel trim and afr wise as that's the...

    Tune for E60 fuel trim and afr wise as that's the avg content of the fuel and runs fine a decent range in either direction. Timing setup a little conservative for E60 so it will run fine on lower E...
  15. Replies
    6
    Views
    922

    E85/Flex Fuel VT numbers!

    Not using HP Tuners but it would be doable with it as well!

    E85/Flex fuel for the win!

    This was E50-E60 fuel in a VT with stock engine, stock turbo, and stock catback still on the car!

    18...
  16. Thread: Bricked Pcm?

    by trdtoy
    Replies
    22
    Views
    1,522

    So is the ECU in question indeed useless for the...

    So is the ECU in question indeed useless for the car? If so what would have caused this to happen?
  17. Replies
    7
    Views
    841

    The 1.6 non-turbo gain up to around 15 whp and 30...

    The 1.6 non-turbo gain up to around 15 whp and 30 wtq. I'm sure similar would be possible with the 2.0.
  18. Replies
    7
    Views
    841

    So what's needed and the process on these ECU...

    So what's needed and the process on these ECU using these items? Can Bflash read all the OEM tune files and edit them as well?

    I've tried tuning these ECU some myself with what I have which is...
  19. Thread: Bricked Pcm?

    by trdtoy
    Replies
    22
    Views
    1,522

    I hope this gets resolved quickly and the details...

    I hope this gets resolved quickly and the details are reported here. I've been on both sides before so can fully understand the feelings here.

    I just hope this does not deter future buyers from...
  20. Replies
    58
    Views
    2,770

    Place this one in your thread and I will review...

    Place this one in your thread and I will review it if you want me to.
  21. Replies
    1
    Views
    262

    Being a stock car on that fuel and plugs/gap I'd...

    Being a stock car on that fuel and plugs/gap I'd keep it under 230% load and 19-20 psi max. Can easily go beyond this safely later with proper mods(feel free to ask me) on the car with the given fuel...
  22. Replies
    58
    Views
    2,770

    Looks like you have maps needed to make a good...

    Looks like you have maps needed to make a good tune but missing some maps to make a great tune and cater to some personal preferences of some tuners and enthusiasts.
  23. Replies
    12
    Views
    658

    After looking at all the maps I'd like to say...

    After looking at all the maps I'd like to say that you have all the maps needed to make a good tune for the car. There are some missing that would be nice to have but overall not needed.
  24. Replies
    58
    Views
    2,770

    Yes, much like Ford and GM conceived a child in a...

    Yes, much like Ford and GM conceived a child in a Korean hotel..... ;-)

    Sounds good.....
  25. Replies
    58
    Views
    2,770

    Absolute load is what you need to go off of. I...

    Absolute load is what you need to go off of. I have an engine load pid but it does not go over 100% unlike the pid you have that I noticed.
Results 1 to 25 of 60
Page 1 of 3 1 2 3