Not through HPT, I wouldn't expect anything either. Their understanding of these ECUs seems pretty vague, asked to add some maps via offsets and they could not accomplish that unless I gave them all...
Type: Posts; User: Illmat1c
Not through HPT, I wouldn't expect anything either. Their understanding of these ECUs seems pretty vague, asked to add some maps via offsets and they could not accomplish that unless I gave them all...
Post the tune associated with the log file, makes it easier to answer questions. With that, what is your actual question? I see you hit 6k+.
Also, what location are you in? I am fortunate to...
Somewhat true, some of the settings we tried were for testing but most correlate. If you have never tuned or messed with a Bosch ECU/ME based almost every piece is tied in someway.
I still have...
You are looking for PE. The thread I have with z here: https://forum.hptuners.com/showthread.php?80655-2014-R-Spec-tuning goes through a fair bit of the basics tuning with HP Tuners and the ECU setup...
Z - That's what I was aiming to uncover. No findings after disassembly and still an issue.
Xerxes - yes this car is tuned for the pulls. The latest tune is V1.12-Zkrmods. The issue developes on...
All mods were removed, tested and inspected. Still KR readings through the roof. Running out of ideas but it's going to be in the 50s and 60s so I will be swapping the knock sensor itself.
Ah yea sorry condenser. I already had it scoped a month ago when this started. Crystal clean seats, heads, tops and walls.
Replaced the insulator and still getting some ridiculous KR readings. No CEL. Next up, swapping the knock sensor.
You can try out my XML. I feel like you are in the same boat I am with the PIDs. Should have everything needed.
Will do, battery has been checked and is new as of a three months ago. Replaced it before starting the tuning. Shockingly.....there are none in the country according to my local dealer. Working on...
It is beyond me. I can feel it dip in power as it comes on so the search goes on. I did have the shop use their scanner and logged some pulls and had no KR so there's that.
PIDs for EGT are...
Still seeing KR. New sensor going in when I can to see if it's just fake at this point. It doesn't make sense.
Quite a bit of parts came in and were put on; 4 new coil packs, upgraded fuel line, lower motor mount inserts, upgraded catch can routing, MX45L plugs, RCA tablet setup for HP Tuners and some small...
What are the car details and what setup do you have exactly? Also, post up your tunes and logs.
Tuning has been placed on hold for mechanical upkeep. Getting KR on the stock map.
For kick's and giggles I rebuilt a stock file of mine and lowered the power but I am still seeing KR on TIP-IN and throughout the log. I am going to toss on the stock file and log it on the way home...
Logged a 4th pull and 3rd pull, saw lots of KR across the pull and in general.
Ah yes my desperation channel list, that was while I was working on troubleshooting the PID issue. My actual one is all cleaned up and labeled in the XML. Just awaiting for them to get back to me on...
Little bad and little good; 02, PSI, Throttle and PIDs (all but EGT now work) but I have pulled up some KR in 3 cylinders and overall, also popped two codes.
Conditions were not ideal by any...
We are all good! I think it was something to do on the HPT end as far as naming, they sent me an email to repoll after a day of no response and it magically worked perfect so if it was on their end...
Agreed. I have. I reinstalled everything HPT fresh to reset it but for whatever reason it?s like my vehicle profile comes back the same each time. Now I mean I don?t really want to but if I have to...
Yes they have been quick but nothing that has fixed the issue; reinstall VCMScanner and re-poll is really all I got so far. Waiting for some deeper support.
Relatively similar, bit cleaner in that lower/middle end response. I like the mid-range power feel as well, it's responsive. I will know more once I can get a good pull done.
Loaded up the 'Updated' this morning, the PIDs are being super funky now, I think I am going to need to reach out to HPT direct, I can't even find the PIDs using the search feature. It's like the ECM...
Yea the 2XXX series PIDs come up as gray and broken and disappear when I go to record but I will try them in the morning. Looked over the file, saw a little spark change but a bundle of other little...