For some reason it wont open. It shows - Definition failed to load
Type: Posts; User: igorsm
For some reason it wont open. It shows - Definition failed to load
You mean the Chrono disable @ Desired airmass tab? Raising from 7500 to 8200?
fail RPM @ Mass AirFlow Sensor @ Engine Diag?
Torque Max vs RPM @ ETC torque management?
Many thanks!
Without patch it cuts at 7100rpm.
Other guys manage to rev up to 8150rpm with patch. But this coyote, for some reason, won't rev that high.
Hey guys,
After applying the rev limit patch, car will still rev up to 7500-7600rpm. Not more.
Maybe there are some other tricks and magic involved to rev it to 8000-8200rpm other than rev...
Permissible tq from pedal - all table to 99,6%?
Tried some road tests after the dyno tune. But...
When you go light to moderate throttle, sometimes car starts to jerk. It shows Torque limiting active: YES when it jerks.
To disable these...
Figured that its transmission related.
Made another pull in 5th gear and everything fine!
OK. It worked. I have adjusted the 2 top load rows in the Max Spark Durability table to the same values as commanded ignition table rows at the same load.
BTW. If you try to copy paste the whole...
Need to lower the Optimum spark tables?
Now, after dyno tune attempt it seems to randomly pull timing in 3000-5000rpm area.
All tq management and EGT management is off. No knock, but still pulls timing and then restores.
84810
Haven't compared the load. But the fuel trims do change as should. With 0.9 multiplied injector map the Engine load is about 90% when it starts making boost.
You wont believe...
It was the Injector multiplier map which I've multipled by 0.8 to compensate for larger injectors.
Tried without any corrections - worked.
Tried 0.9 mult - it worked.
Will...
I overwrote the Weistec tune with HPT.
Same problem here84557
New plugs, no vacuum leak, trims near zero.
Hi.
Car is 427 LS3 cammed, completely built.
Everything was fine for 2 years but car now behaves weird.
After driving about 10-15min it starts to backfire and bucking. Especially at idle.
...
3947939480
Hello.
Please help with a tune - why car reduces spark timing with gears while the IAT drops?
Also, how to properly tune the pedal to engage WOT (open loop) sooner. Car is still...
You mean only choose ignition rev limiter control?
without ETC and fuel cut?
Fixed...
Please - never touch TB opening table to make 102mm TB less sensitive...
It was the cause or REP mode.
Yes, original.
I want to try oem tb tomorrow
Have you found any solution?
Tried it today. Went to test - everything was perfect. Tried any abuse on it. With and without TC.
But after 5 hour stay, tried agian and... Reduced Power again from 1st attempt... :(
But I...
I had such problem on 2008 Escalade and 2008 Corvette C6 A6.
But they both had a harsh gear engagement after that.
Corvette was locked it 4th and didnt change any other gear.
Escalade showed...
:D
what will it do??
Hello.
I have tried everything on a customers car (2010 Camaro SS A6 L99) with no success.
Power reduced mode pops up everytime at WOT/wheelspin/kickdown.
I have disabled everything that may...