here is my current editor setup after you made suggestions. im tuning main ve with maf turned on. seconday ve tuning went well.
Type: Posts; User: Blackcrew
here is my current editor setup after you made suggestions. im tuning main ve with maf turned on. seconday ve tuning went well.
Thanks for the reply. My editor I posted in the original post has been changed to what you suggested in you answer. The full throttle pulls are amazing and dont seem to be running out of injector....
here is my log of what is happening, seems like its when iat temps are around 129* it starts acting up. not sure if i can bump the parameters high or try and find a way to cool air intake. not sure...
Thank you thank you thank you for the help. Made those changes and a few more. And now tuning the secondary ve. The car is an animal out of the hole all the way through the rpm range. After driving...
Hey guys cant figure out why i cant gat this thing to idle in drive or reverse. park is ok put still rough. does not have any get up and go. gen 3 5.3 aluminum block, cam, springs, pushrods, 3200...
I have an aluminum 5.3 lm4 with stage 3 btr cam spec .617/.593 @.50 231/242 with 112 LSA used all recommended springs and pushrod from BTR. Car starts runs great but has a pop through exhaust, I...
I did a remote tune for someone that put a 6.0 with a BTR stage 4 cam 224/230 @.50 .553/.553 109LSA. I just want to make sure the truck will run enough to get it to my house. It was a 5.3 so i...
thank you very much
Hey guys justs wondering how many credit are needed for a 2016 silverado with a 5.3 MPVI 1 pro. Vehicle list say 2.
Hey guys I'm looking to put a 6.0L I'm my 2011 Gmc truck that has a 4.8 with a 4L60. Should I just tune the 4.8 program to run the 6.0. Or just flash a stock gm 6.0 program in the 4.8 PCM.
I know this is old but did you get the issue fixed? And what cam sprocket did you use to delete vvt?
Hey guys. working on a stock 5.3 with a 4l60e in an old 68 c10. trucks runs awesome, but i have spark knock from about 3000-4000 rpm then goes away. Tried a couple things to get rid of it but can't...
i have free access to all gm programming so flashing factory OS shouldnt be an issue. but if i have to reflash with tis2web it should be the same OS as original wouldnt it. find out later tonight...
Hey guy I have an 02 Bravada that I tried to delete some codes in. I was able to read file, license it, delete codes, but now it won't write calibration it fails. Gonna trip again tomorrow after a...
Put it back to what stock settings and multiply it by .25?
Ok i will try those changes. Yes the truck is stock, Cold air intake and a super 10 muffler. I never thought of tire change it does have alittle bigger rubber not much. Would it gain more if i tuned...
Hey guys i have an 07 Sierra new style 5.3 did a tune on the weekend and when you take off from a dead stop it doesnt spin the tires.(sorry not sure how to discribe the symptom) it feels weak but...
Hey guys I have Os # 12606960.2004 Chevy Silverado. Im looking for a match to do a segment swap and I'm not having any luck. I have done some research and it looks like im s.o.l, but everything is...
Ok thanks I will get a log as soon as I can.
no log file at the moment, not sure what parameters i should be logging. STFT, LTFT, RPM, MAF, ECT, CYLINDER AIR MASS.
Hey guys new to tuning a cam. I'm having trouble with my truck stalling after it get warm at idle, start chugging and stalls, starts back up ok but dies again. 2002 6.0 4l80e in an 84 C10 with a...
Im trying to do a segment swap 4l60e to a 4l80e and my compare file comes up blank. and segment swapper does not highlight. first time trying this, does my 5.3 file need to be licensed before i can...
OK so if i cant change the vin. I have access to GM TIS2WEB so Im planning on flashing the pcm to the vin that matches the cab which is a 2004 1500 5.3 dbw. Then tune the pcm to a 2004 2500 6.0 dbw...
I currently have a 2003 1500 cab sitting on a 2500 drive train. Everything went flawless. But now that it's time to do our awesome Ontario Canada e-test the machine reads the vin in the PCM and they...
I know its mostly stock still learning. Im doing a little at a time. Im also still learning the data log in the scanner as well. I did reset the presets with the scanner as well. Thank you for the...