Search:

Type: Posts; User: spoolboy

Page 1 of 8 1 2 3 4

Search: Search took 0.00 seconds.

  1. Replies
    5
    Views
    207

    93126 This is what I was logging when I was...

    93126

    This is what I was logging when I was figuring stuff out. I have not tuned anything yet, just logged and tried to figure it out.

    You'll want to add TPS to that, either in voltage or %...
  2. Replies
    5
    Views
    207

    Log shift ID and Shift situation and it will tell...

    Log shift ID and Shift situation and it will tell you what tables are being used.
  3. Replies
    2
    Views
    142

    No.

    No.
  4. There is no channel or pid for it. But there is a...

    There is no channel or pid for it. But there is a math.
  5. Would you share the data you wound up with for...

    Would you share the data you wound up with for the PWs vs Fuel mass using Cat injectors on E85? This is a fairly common idea people bring up.
  6. Table 44389 Max Demanded Throttle Voltage and 35059 WOT Override Throttle Setpoint

    I think I know what these do, but it doesn't make sense that they would be scaled by RPM.

    Can someone explain what's going on here?

    And why the max demanded is below WOT until 4800rpm in a...
  7. Did you by chance do the flex fuel patch for E85?

    Did you by chance do the flex fuel patch for E85?
  8. Thanks! I agree with you.

    Thanks!

    I agree with you.
  9. Were the Hellcat tables fairly close to what you...

    Were the Hellcat tables fairly close to what you ended up with?
  10. If you log, I beleive you will find that most of...

    If you log, I beleive you will find that most of the cells aren't hit anyway.

    Also, keep in mind that the Scats do not have a factory wideband. If the car doesn't have and aftermarket WB...
  11. Have you seen this? ...

    Have you seen this?

    https://forum.hptuners.com/showthread.php?66353-Dodge-tuning-w-ANN-InjPW-v-Fuel-Mass-spark-advance
  12. I?ve heard people say the hellcat injectors don?t...

    I?ve heard people say the hellcat injectors don?t work well in the other engines. Also, copying the stock hellcat injector fuel mass tables directly over is not going to be dead on either based on...
  13. Looks like it's following the max TIP table? ...

    Looks like it's following the max TIP table?

    Try changing that around and see what happens.
  14. Replies
    16
    Views
    498

    If the baro learn doesn't do it, try setting the...

    If the baro learn doesn't do it, try setting the torque management>driver demand tables and throttle WOT and Pedal WOT all back to stock and see what happens. It looks like you may have something...
  15. The answer is probably no. But you can: Save...

    The answer is probably no. But you can:
    Save ?current? tune file.
    Flash back to stock.
    Have the dealer flash your vehicle with the update.
    Read/copy the dealer update tune file.
    Open the...
  16. It seems like the way to approach this is to...

    It seems like the way to approach this is to unhook the manifold pressure reference to the fpr and then dial in the VE.

    Then hook up the manifold reference and dial in the vacuum correction.
    ...
  17. Replies
    16
    Views
    498

    44450 make it 0 not 8160

    44450 make it 0 not 8160
  18. Replies
    22
    Views
    1,566

    Dredging this back up again. So the TMAP...

    Dredging this back up again.

    So the TMAP multiplier (44395 in my file) airflow>general>map estimation looks to be the table that allows for the calculated or estimated map based on rpm and mass...
  19. Replies
    7
    Views
    236

    Sometimes.

    Sometimes.
  20. Replies
    7
    Views
    236

    It depends. Different years are mapped...

    It depends. Different years are mapped differently.

    Post your .hpt file.
  21. Try unhooking the vacuum reference and...

    Try unhooking the vacuum reference and (carefully) make some runs and see if that is indeed the issue.

    What exact table are you talking about that is all 1s?

    I found 2 that could be the table...
  22. Replies
    1
    Views
    198

    Stock injector sizes?

    Lots of conflicting info out there on the google.

    What are the stock injector sizes?
    3.6
    5.7 (different years?)
    6.1
    6.4
  23. By vacuum multiplier, are you talking about the...

    By vacuum multiplier, are you talking about the row axis of the offset table?
    fuel>general>offset?

    On my 2016 Scat (stock tune) it is the same from 0 to 100kpa, which seems incorrect.

    Is your...
  24. Replies
    3
    Views
    303

    It wouldn't be unlocked unless someone sent it...

    It wouldn't be unlocked unless someone sent it out for unlock.

    2015+ are all locked.
  25. Will this cause issues? Re-mapping tables?

    Take a look at the before and after.

    If I do this, will it cause issues? Seems sketchy. Afraid to try it since I haven't seen it mentioned.

    Basically I'm directing a drive mode to a different...
Results 1 to 25 of 191
Page 1 of 8 1 2 3 4