Search:

100051100052

we went with this converter since it has aftermarket rims, larger tires and weight of the truck. i also forgot to mention it has a texas speed stage 1 cam with the AFM/DOD delete kit.

finally got the log...100050

sorry man ive been slammed with work. getting the truck on the dyno to get a new log. ill post it tomorrow

yes i actually meant to post tune and log. sorry it was a late one yesterday

sorry man it was a late one yesterday.. but it only made 420HP to the wheels.

alright guys this thing has been a little work in the making for a friend, but we got long tube headers, no cats, edelbrock supercharger with stock setup for supercharger, a Circle D converter...

Sorry for the delay I've been doing a cam swap in a 2015 sierra with DOD delete...

I fixed the timing issue, tracked it down to the intake casting where it mates to the heads was off and wasn't...

made some changes to the tune cranks up cold a little better but its still pulling timing under WOT. now my AFR is running 11.9-12.4 during cruise speed.


85009

85009

it does surge cold and when coming to a stop. but warm truck does fine. it does surge a little during warm if I slap the throttle, it'll fall down to about 4-500rpms and catch itself and smooth back...

made some adjusments, not surging as bad or stalling out. but is getting worse on pulling timing under WOT.

im still trying to figure out how to properly tune the VE

84954
84955

made some changes in the tune and helped the idle some. but still having the timing issue under WOT

84952
84953

ok ill give that a shot and see what I get. it'll be after 6 today before I can make changes and log everything. ill post that log tonight. thank you for your advice

Need a little assistance if anyone can help. i've got my truck to idle good and it drives fair but on a cold start it surges and might cut off, it sometimes surges when i'm driving and coming up to a...

found the file thank you for pointing me in the right direction.. here is the datalog from last night with knock retard


8493384933

repolled and made the change to my kR sensor input for the channel and got it working. I don't have any knock retard showing on my data. but dummy me didn't save the log when I recorded the data so I...

for some reason I haven't been able to log my knock sensors, ive tried changing the settings for it but it wont log it. I tried logging another vehicles KR and same thing. im sure its a configuration...

Need a little assistance if anyone can help. i've got my truck to idle good and it drives fair but on a cold start it surges and might cut off, it sometimes surges when i'm driving and coming up to a...

for some reason I'm not able to open your file... I'm chasing a part throttle issue which causes limp mode...

MAF will never be used again. its turning into a full blown race car honestly. ill make those changes and give it a try. you know a lot I see.

ive been update my software readily atleast each week from HP website. would that include the regular enhanced speed density OS?

and ive been tuning a lot on the VE and timing. its just got me...

ive got a 2000 trans am with the stock LS1 bottom end has ported and polished 243 heads, a 6xx/6xx cam, roller rockers, No MAF, ls6 intake. ive got the car to idle but it wont take the throttle when...

Is the 2016 camaro SS supported yet?

kinda crazy HPT supports transam same year, motor and pcm.. might have to contact support and see what can happen

hey guys I cant seem to get into the pcm of this car. does anyone know if the car is tunable under HP tuners? if so what pcm hardware do I need to enter to access it?