I’m pretty sure you’re going to need to upgrade to the MPVI2 as that is how VCM Editor is able to read/write all the newer ecu’s. My C63 is a w204 M156 so I was able to read and write with the MPVI1...
Type: Posts; User: quaalude
I’m pretty sure you’re going to need to upgrade to the MPVI2 as that is how VCM Editor is able to read/write all the newer ecu’s. My C63 is a w204 M156 so I was able to read and write with the MPVI1...
Are you connected to the internet when you try to read your vehicle? MPVI2 needs an internet connection to get the calibration from the HP Tuners server.
Looks like it is supported now.
106983
Congrats on the new car and welcome to the Mercedes forum! The closest vehicle with your engine that HP Tuners supports would be the 2015+ C63 with M177 4.0L V8, which they recently added as it...
1. Set torque management tables so pcm is not reducing torque/cutting power
2. Tune the MAF tables ECM 44326-44329 so EQ Commanded matches actual WB EQ (both banks). You need to setup two graphs...
Do you have your stock tune file? Quick look at your logs and the first thing I would do is tune LTFT to be <5% so that your fueling is correct and the ecu is not adding a lot of fuel to get to your...
I bought the Accessport used so I updated the firmware on the Accessport to the latest revision from Cobb using Accessport Manager. I downloaded the latest calibrations and did the full install and...
HP Tuners support was able to help me out (thanks HP Tuners Support!). I had to write "Restore Stock Calibration" and right afterwards do a "Write Entire" of the stock calibration that was initially...
Hey guys, any MK6 GTI users having issues writing the tune file to the ecu? VCM Editor gets to the 2nd erase phase after doing the initial write phase and freezes and doesn't proceed. I get the...
Thanks harmless for posting your spark table. I incorporated the negative timing in the low load column similar to your settings and the MCT transmissions seams to shift a lot smoother. What is...
Mind posting a screenshot of one of your timing tables harmless? Also, are you running an ethanol kit or added the ethanol sensor and tuning it? 15mpg highway with e60 is a little low for my...
Thanks BackyardTurbo!! Yeah, we have a bunch of Racetrack and Thornton gas stations here but I'm not sure if I want to make the switch to corn juice as the gas mileage is what is holding me back. ...
I went back to the track again on 1/17 and 1/31 when the weather was cool here in FL. My car is running consistent 11.8's on Michelin PS4 at stock tire pressure, full weight, and 93 octane. These...
Hello Steven,
Can HP Tuners read this ECM: 7E8, CAN, ECM -EngineControl? It's for 2014 Volkswagen Jetta, 2.0 L, 4 Cyl which is similar to the A4 2.0T. Thanks.
As BackyardTurbo mentioned: if you can post your tune using VCM Editor 4.2.12, then other forum members using the stable version can look at your tune and give you advise.
I just upgraded to the MPVI2 from MPVI Pro. MPVI2 can tune everything MPVI can plus the new vehicles listed on the HP Tuner website. There is no need for a separate laptop as the software is the...
You will receive an email stating that your order is complete and will include a tracking number in the same email. Turn around is real fast. I overnighted my MPVI last Thursday and USPS lost the...
Thanks Fu03steveC63! Ever get yours sorted out?
Hmm, I don't have tables 19238 & 19244. I have table 19236 though and this is on release 4.2.1 (see attached screenshot). What release are you on?
Thanks kbaldi29 for the offer, I'll...
Yeah, I'm not sure what caused WB5 to go lean during that run. Attached is the run right before this one with no lean spike.
I double checked my spark tables and I lowered everything below 4k...
11.844 @ 119mph time slip with Quaalude's HP Tuners street tune.
Hey guys,
Hit the dyno today and was able to get 450.42whp and 401.29 ft-lbs SAE Corrected on a Dynojet 224x dyno!! Uncorrected values were 449whp and 400 ft-lbs. Weather was in the mid 60's...
Yes, I'm using some of your charts and tables you posted previously. I'm just using the spreadsheet to populate a single intake and exhaust table from multiple logs as some cells in the various logs...
Ok, did some more testing yesterday. I was able to get commanded throttle to plateau at 100% for .7s (see attached log). This is a lot better curve than the peaky curve in the previous log. I...
Ok, good idea BackyardTurbo! I've got multiple logs so I made a spreadsheet and use the MAX function. Looks like a couple of degrees difference for both cams compared to stock map.