Search:

thanks for the response guys

I Know this isnt the appropriate place for tech advice, but hear me out.
gen 4 6.0 fleet vehicles, had a cyl 3 and 5 misfire, leak down test verified compression was comming back through the intake,...

Unfamilliar with the ecotec world. I have been told that the e39a ecm will not work well as a standalone. They told me it wont run without certain BCMs and a VSS.
just looking for input, Thanks in...

Sourcing injectors for a 6.0 truck intake. Cammed 6.0 w powerdyne charger. Looking for max 10psi of boost.
using the various calculators i believe a 60lb injector will be sufficent. non return fuel...

yes, vats are disabled. engine will run just fine if i manually jump the relay. but the pump runs constantly obviously.

Im working on the dreaded 98 f body ls1 swapped into a c 10. Everything I read indicates that Blue 37 is the correct wire to activate the fuel pump relay. I have no voltage on that wire with key on,...

Sorry for the late reply guys, i've been extremely busy.
this is the data sheet i received with them. if you could help me figure out what to do id greatly appreciate it!!!

I tried to post a link to a pic of the data sheet but I'm assuming it won't let me because I'm new

They're 60lb injectors, injector number one =static flow of 625cc 5ms@6krpm = 181, 2.5ms@6krpm=101
Static flow tested @43.5psi for 60 seconds duty cycles 50 and 25 percent, impedance @12.0-12.2 ohms

I used serial, didn't connect a ground because I didn't have an offset

Thanks for the help guys, unfortunately Im still at a loss.. I'm either second guessing myself too much or the data sheet the seller supplied has the wrong data..

Thank you, I thought that's the table I needed to work on, just wasn't sure.. This is the paperwork that came with them....

I had this issue on a swap once, from my understanding there's two types of sensors, one sensor grounds through the exhaust and the other sensor grounds through the harness, all I had to do was add a...

Ev1 60lb injectors off ebay

My 66 c10 is now 5.3 swapped, procharged and thought I could use some bigger injectors, wondering if someone could give me a hand, learning tuner here, don't make too much fun of me please lol
Not...