Search:

I wound up buying a used Surface pro 3 and it is great. The detachable keyboard makes it much easier while in the vehicle

Well now it is no longer logging serial data. I am burnt out for now, I will get back on it tomorrow

Well I got it working but I'm not sure which thing I did it actually made it work
I did the transform as directed but it didn't work.
Then I remembered I had To repoll and it updated something ...

Having a hard time finding a replacement cable. If Crankz1's suggestion doesnt work, I will probably go this route or wait for your 310 to be available

Thanks for all your help

Thanks I will give it a try tonight or tomorrow as soon as I can get back to tuning

I have one other thing I can try to get the 300 to log serial data. I am using a Digi serial to USB converter. I can try another brand converter that is known to be supported by HPT with the VCM...

Who can I contact to see if this is something I want to do

Is it DR. Mike?

I wish I knew this before I purchased the 30-300. I would have purchased the 334 but that is a newbie for ya LOL
So, would I be as well off just buying the pro features to use with the scanner and...

I am having a problem getting the VCM scanner to read my serial input.

First, a little background on my set up

I have a 2007 Suburban with a 6.0. I purchased the MPVI2+ without the Pro features...

Same issue here but I didnt think you had to purchads the pro link. I have the 2+ and am reading Lambda on the gauge but it goes away from the channels when I start scanning

Thanks, I just went and looked at those codes but they are for cylinder deactivation. Is that correct?
Also I do not see a P3411. Did you mean P3441?

Thanks for your advice

I am a real rookie and Not sure exactly where to make these changes. I am in the tune under engine/retard/max knock retard vs RPM vs MAP.
Is this what you are referring to...

No this was a one owner and I know the people that had the truck since it was new.
I guess It was just one of those things that failed

I am not sure of the process on valve seats (hardened steel) and installed in an aluminum head. The two metals have a different expansion rate so there must be something different when installed in...

Thank you Kevin, I will load it tomorrow before I head to work

Can someone point me in the right direction to pull some timing out when the engine starts to ping? What areas do I need to make changes and I will give it a try
Thanks

Thanks for the feedback.

I am sure it is ping / knock The exhaust has been on the vehicle for a year now so I am used to how it sounds but thanks for asking me to clarify.

I have added Knock...

Kevin
I just now uploaded the tune you sent. It now shifts to reverse without dieing! It also ran much smoother and didn't seem to "labor" as much. Very reminiscent of adding timing to my old 350...

Thank you for taking the time to help me out. I will give this a try tonight or tomorrow and see what happens.
It is also a great learning opportunity for me by comparing the tunes and understanding...

Found The Pics

117566

117567

Actually it was weird. I had been pulling a trailer from a short trip and was putting it away. I backed it in and unhooked it. When I started the Suburban to pull forward, it made an awful noise and...

As an "old school" engine builder in my earlier years, I am entering into the tuning world with the help of my son...who lives 100 miles from me. Because of the distance between us, it makes it very...

Thanks, I found a deal on a used Surface Pro 3. It works great so far

I am new to tuning and I am doing it with my Dell Latitude laptop and it does a really good job.

The size and bulk of the laptop is a problem and also creates a problem with using the mouse pad. I...

I want to purchase the VCM suite and have a couple questions.

I would like to have the software on my laptop and on my desk PC. Can I do that under a single license? I understand I can load it on...