No you cannot. RTD+ is for logging and writing tunes only. Reseller with MPVI will need to send tunes.
Type: Posts; User: Tom Dottavi
No you cannot. RTD+ is for logging and writing tunes only. Reseller with MPVI will need to send tunes.
I am not. Only at 18lbs of boost. 1v = 54kpa and is set to 6v so way more range.
Been messing with the supercharger torque loss (since it does not have one). Seems to have helped some but...
Had an issue with reading a 2020 Ski. Was told to try again but need to contact the customer. Would like to know if you were able to read with the latest beta.
Don't have a boost table....
The wires are fine and the sensor was changed. Changed some of the torque settings and no longer get an overboost at WOT but still when rolling off the throttle. Again, I believe this is because it...
That is the issue. Need to use the beta software.
Have a Sea Doo 300 with a turbo (I know this is a Polaris page but they have the same type of ECU) and having a P0106 and P0108 code. This is something with the way the boost comes in vs the...
Have a Sea Doo 300 with a turbo and having a P0106 and P0108 code. This is something with the way the boost comes in vs the supercharger. Do I have to change a load table or a airflow table? Any...
Completly agree with you. This is one of the ways it keeps the RPMs where it needs to be. Just seemed to be more than it should be. Got my VE dialed in and the KPA is now around 65-70 and the idle...
What is the best way to fix?
Have been told we have access to log injector pulse width but have rescanned and nothing for injectors. Am I missing something or is this coming soon?
How are you extracting it from the ECU?
As far as the Riva tunes they mostly use the injection correction table and keep the lambda stock. So it is lean.
Been using the software for a bit now and can share my experience. It does read DTCs and you can clear them. Also reset the maintance light. As far as adding keys, I do not believe that is...
So I know when adding a cam you need to decrease the VE in the lower RPMs and increase in the upper RPMs. I do have it sorted out in the upper range but some questions in the lower idle areas.
...