Hello, my problem was the high pressure pump. The car was zero km but I changed it and solved it.
Type: Posts; User: PauloP
Hello, my problem was the high pressure pump. The car was zero km but I changed it and solved it.
Here's the OEM tune. This car is heavily modified. The engine is an Ecotec L4 with 204hp that with turbo is with 336hp.
Hello friend, I tested your modifications but still does not enter the fourth gear before 120 km / h
Excuse me. You're right. I wrote wrong. It's fourth gear.
If you correct it for me I am very grateful.
Thanks for the answer
In PCM E80A, the fuel pressure is controlled in relation to the air volume measured by the maf sensor, ok.
Is there any other parameter that can make the high pump pressure decrease?
On the map...
Can anyone help me understand why the third gear only enters after 4800 rpm 130 km / h in manual shift?
100296
It is so original
The last beta version. 4.5.1221
Hello guys, I'm having trouble understanding why my tune isn't changing from 4th gear to 5 and from 5 to 6th gear in WOT.
Does anyone have a suggestion?
96480
Does this rule also apply to ford?
I have P0420 and P0430 disabled in the file but always appear on a Mustang V6 3.7 2012
Hello guys, I'm not sure if this Mustang file is original or has already been tuned.
Does anyone have an original file of this car for comparison?
Thnak you
Hello everyone,
I have a problem with my tuning and I need the help of an experienced tuner.
I have this truck that put a turbo in it. He runs well. The problem is when you change from first...
Hi Guys, I'm working on this project and I'm having trouble tuning it.
I'm using a 250 kpa map sensor. At the moment of transition from depression to pressure he fattens the car a lot. The lambda...
Hi, I tried this but it did not work...
thank you.
I'll try to do this
All the best
Hello everyone, how can I include parameters in graphs in the chart x time in my log?
In the basic configuration it does not show RPM, KR, inj duty (%)
Can anyone help me with this?
Hello everyone, how can I include parameters in graphs in the chart x time in my log?
In the basic configuration it does not show RPM, KR, inj duty (%)
Can anyone help me with this?
Hello Young, has anyone here assembled a turbocharged project on a 2.5 ecotec naturally aspirated with ECM E80A?
This engine has direct injection. Do you think injectors feed 340hp with E85?
...
Hello guys, I'm having trouble modifying the RPM limiter of a PCM E98 diesel manual transmission
The truck limits on 4500 in march and stopped 3500, but that's not what I see in the original file. I...
Thanks for the answers SultanHassanMasTuning and GHuggins.
Here is the log with the SultanHassanMasTuning file
It still shuts off the engine
Hello guys, I am having trouble tuning the idle of a Camaro SS LS1 Automatic transmission with a cam cls 284 / 292-12 uhr from Bullet cams.
I'm using 91 octane gas.
Can anyone help me with how...