Big 4L worked, Thank you very much.
Type: Posts; User: 1duffman
Big 4L worked, Thank you very much.
Sorry to pull up something so old, but I'm having a similar issue. I am getting the same messege. I have a 97 S10 5 speed, and I am having trouble reading the PCM. It will connect to the scanner and...
Ok Im Gonna Throw A Tune Out. I haven't Even Gotten The Injectors Yet, SO I Don't Have A Log. But I Got Some Data Off The Deatsch Werks Site For Some GM Vortec 60# Injectors. I Wasn't Able To Copy...
I went in to the repository and searched for 60# Injectors. I found a couple, but only one that got slightly close to my application (engine size). I'm still tryin to figure all this out, and am...
What are the chances of figuring out accurate injector data when all you know is 60lbs/hr @ 43.5psi? Or even slightly close data?
I got an 02 Denali XL, Cammed. I my idle RPM doesn't match what my set point is from roughly 90 degrees and below. Ill up load a scan and my current tune. In the scan though you'll see my idle RPM...
I know, I'm asking since there is now bluetooth capability for dataloging and flashing, if it is an option? Are you planning on doing it? Not every laptop is bluetooth compatible, or every tablet...
This is how I've understood it: If you currently own the MPVI1 pro and upgrade to MPVI2 for the 190, you get the standard version. And then once the pro stuff is available that will kick in for free....
But what about the Suite? Are we going to be able to have the VCM Suite on a Android tablet?
So I've been looking around the forum trying to find out what is compatible with what... So I see there is Android compatibility, but I cannot find what devices. Is there a list somewhere that I have...
So if their the same software, when I upgrade is there anything new to download? Or will it be seamless, so when I open the box, plug in and register the pod, I can just continue on my merry way?
Just wondering if you have an ETA on a new round of upgrades? And maybe the expander hub, I'm sure a lot of people are wanting for that hub before they upgrade. Also I've been trying to understand...
Just waitin for the pro feature and expander hub availability before I upgrade. I bought the pro so I dont want to not be able to use everything, just to upgrade some hardware (for me). I've never...
I assume there will be a list of compatible platforms...? Since we are now wireless I assume we will also be diskless too...? I just picked up a MS Surface today and just by coincidence found out...
There is a new security module they have to license from FCA to gain access. I work at a Chrysler dealer and once I've found out about that module have wondered how that is going to affect HPTuners.
Umm no one has answered the Android question.
What is compatible? I've been wondering this for awhile and just now got the common sense to check on the forum.
Awesome!!! I didn't know about the KR decay rate. I will have to try that and see how it turns out. What value would you suggest i start with? Maybe I'll try .001 at a time and see what happens....
What would be the best way to blend these three tables? In gear and in park are virtually the same table. But to blend them in to the main spark table is boggling me. The idle spark tables are set to...
That is actually a stock table. I haven't touched it, I've played with my main spark table, that's about it. As far as knock goes the only thing I've touched is burst knock.
698796988069881
I have a shake or shutter at up into the lower 60 mph area. 30 mph is in town driving in my town so I see a lot of it, though it is very pronounced then and 50 and 55mph and during WOT acceleration. ...
I have similar hot start issues. Have you came up with anything more with yours? I used to have the same stalling issue when coming to a stop. I had to mess with the base idle airflow in gear, though...
I feel ya on that one!!! I have a Gen3 and don't understand what they mean either. And upon a search for "cranking fuel" found this thread. I have a very similar issue except mine will die and not...
Sorry to bump this back up. But im having trouble properly failing my MAF. It's set to fail on first error but it doesn't fail. And when I set Frequency Fail High to something like 0, at about 2000...
I tried all that and went in to limp mode... twice. How can I fail without going into reduced power?