Search:

Mods:
Garrett Stg1 Turbos
Mishimoto FMIC
SPD Catback
AFE Cold Air Intake
91oct

Issue is when in manual mode 1st gear hold at 3500 rpm and then stab the pedal the truck will hit a cut/limp...

I tried the change you suggested and it seems to be better, but i can induce the same exact scenario with throttle around 20-30% and rpm in the 2k rpm area.

The map sensor is in the location per the whipple kit, with an extension harness from them. Harness isn't pinched either. You can see that the throttle angle is jumping around as well which i can...

Mods:
Stg2 Gen 5 Whipple Kit with 132mm Throttle Body
ID1050xds Injectors
LT Headers
Catted Y Pipe

When cruising and light throttle tip in you can induce the throttle to fluctuate/shutter like...

Any specific tables that you would suggest to adjust?

LPFP is dropping to ~55psi under load by redline when 73psi is commanded per the log.

Mods:
ARH 1 7/8 LT Headers
AFE Intake
Innovator's West Lower Damper 9% pulley
2.38 upper pulley
Ported...