I’ve checked a little for vacuum leaks. Most of anything that was vacuum actuated I’ve since removed. But I’ll pull the intake off over the winter and probably replace the gaskets. I did it when I...
Type: Posts; User: Bayer-Z28
I’ve checked a little for vacuum leaks. Most of anything that was vacuum actuated I’ve since removed. But I’ll pull the intake off over the winter and probably replace the gaskets. I did it when I...
Bump
Anyone?
Nothing crazy down to the car. BTR cam and some massaged heads. MAF has the Halltech screen FWIW.
Didn?t see anything with the rolling and parked timing tables. Added a little...
Can y'all look over my tune and see if there's anything I possibly missed that would cause a random hanging idle when warm. Sometimes it hangs to 1200 rpm, after I do a couple hard pulls, sometimes...
New MPVI2 interface doesn't need the key. ReSync and it took it. :D:pray::pray:
I got it!
Yeah tried that. I copied my tune over. Just says "unlicensed vehicle" and the options is greyed out. But i purchased two new universal credits and I cant find the application key now. the email...
ok. What do I have to do?
It's not giving me an option to license it.
Replaced the PCM in my 2002 corvette and had the VIN flashed w the PCM. Both OS are the same, shows my VIN on both read screens, resync'd Interface and Credits and license key still show this car. ...
I don?t know why it keeps putting a question mark. I can?t fix that lol
Yeah I?m aware. I?ll do a pump first and see how it goes. I?ll have to install a pressure gauge and monitor it. If it keeps diving I?ll do a full return system. Best off locking the fuel pressure...
It idled a lot better (didn't want to die after I hit the throttle when it comes back down, but was almost a hanging idle at 1150 and 25* of timing with 15.5 AFR. So I added some fuel under 155*. It...
Check the VE table. I did some smoothing. I figure the Fuel trims will make up some differences there.
I changed the OL EQ table to that of a 5.3.
110685
Ahhh some good insight. I?m going to mess w those now. It?s cold so I can test it out. Thank you!
And what tips are there for getting solid idle airflow numbers? Correction factor I can setup?
Tune is pretty much done. Only thing I'm still battling is cold idle issues. It fires up fine but doesn't maintain an idle very well, but does fine when it's warmed up. I think I missed an airflow...
Got it… math was off. Brackets and parentheses was wrong. And the histogram MAP was set to read in PSI instead of kPa. Messed w it some more today and figured it out. And it’s been working when I...
Here’s the pictures.
Had to host them because they won’t upload.
https://ibb.co/R4y0Wk2
https://ibb.co/FVxSKjD
https://ibb.co/KjTRgVk
So I have a histogram that I set up to read my wideband that I am back feeding through the AC pressure sensor. I have a new MPVI2 interface on the way.
But the histogram to tune VE tables works...
^ The VE may needs a bit more work then. My WB shows 12.5-13 @ WOT...Still rich.
And I'm not getting a MAF code. I'll reset that MIL light and see how it likes it. Not a big deal. I'm...
^ They're reflowed to 42# Stock injectors from FIC.
And I've asked a couple times for correct injector data, from them and on here and all I've ever gotten was the run around and incomplete data....
^ You're welcome.. I dun had this tuEn compruter from some free chicken so I touut I'd giev it a trai..... My expeereinsess aernt dat uv sum dees fanse peopel that does it forse a livinz... So I...
^ I meant average. I didn't think pump gas was that far off. Never heard much about it.
I've asked the gas station what their stoich value was and they didn't understand me at all.... Which I expected.. So I just set the Stoich value to the local elevation.
And my WOT is still...
Anyone??
Not sure what he looked for, but I got a guy that passes me and the only thing he says was the rear o2's were showing as "not supported" for some odd reason. I've never had an issue passing with...
Never had an issue passing CT emissions with SD.