HP does not support delete tuning.
Type: Posts; User: dsltech83
HP does not support delete tuning.
HP does not allow access to any emissions related tables.
Yes.
System>Fans
The Tuning School. Tony Gonyon teaches their Ford courses, he is amazing.
Do you know what calibration it needs? I have an 05 Excursion, let me see if I can find the stock file.
Speed has a lot to due with ecoboost towing numbers. The 2013 that I had got 7 mpg at 70 interstate and 10-12 at 55 mph towing locally with my 5500 lb tt. If you tow fast you are on COT fueling all...
Send a support ticket
HPT can only change pcm. Advancetrac is in the ABS module.
Those codes mean the cam timing is mechanically off
Yes I would open a support ticket. Ficm voltage is supported on some calibrations.
Ok. I may have to send a support ticket, my button to repoll for channels doesn't light up.
Can anyone tell me what the 22824 - Trans TCC Hot Lock Min Speed Ratio: Speed Ratio must be above this value for the TCC to lock in Hot Lockup mode , anyone have an explanation for it? Not surewhat...
Do all of the channels work on your truck?
My 05 excursion all of them won't function.
FPDM is not ment to be used with a return style fuel system. It can't control pressure so it pulls power.
What year crown vic?
I'd email support.
Thank you!
Really just looking for advice on where to stop with boost, probably won't even mess with timing. Going to play with shift scheduling and tcc a little too.
Going to make a safe tow tune.
Anybody have any experience with this? Towing a 5500 lb travel trailer, going to write a tune around that. Low elevation (around 500 ft where I live), stock truck except for an intake that was on it...
Jim Ferraro @ Ferraro speed would be the man to talk to about that.
For what its worth, I have read and wrote my 05 Ex 6.0 with 3.6 no problem. I'll try with 3.7 when I get the heads back on it.
So set the desired ECT to 200* then. That way the fans won't mess with the thermostat opening. The ECT table looks at ECT and ambient temperature to set fan speed. The AC table controls fan speed...
There is no High speed fan and low speed fan. The tables are for the percentage of fan speed. Fans are pulse width modulated not a set speed.
No in fan speed vs. ECT table, table 44002 you set fan speed percentage vs. ECT. table onlygoes down to 200 degrees, if you want fan control below that you will have to rescale the column axis on...