Search:

Type: Posts; User: luciddeath

Page 1 of 6 1 2 3 4

Search: Search took 0.00 seconds.

  1. Replies
    19
    Views
    567

    That's just lockup brother, being a 5 speed i...

    That's just lockup brother, being a 5 speed i wouldn't not have it lockup. But you could raise the value to keep it unlocked.
  2. Replies
    3
    Views
    164

    I've been remote tuning these for a while now...

    I've been remote tuning these for a while now with great results as well as a few that come in person. If you don't want the headache let me know.

    From what I've gathered by my remote customer's....
  3. Replies
    19
    Views
    567

    4200 across apply 3rd and about 3600 across on...

    4200 across apply 3rd and about 3600 across on release in 3rd. Its output speed so its about 5900 rpm lockup and 5076rpm unlock.
  4. Hey I have one of these I'm working on atm too....

    Hey I have one of these I'm working on atm too. The nn was " disabled " from factory. Its a vvt cam with 4 degrees would you recommend enabling the nn to turn it off or would it have to just be tuned...
  5. I never adjusted transient fuel decel tables. I...

    I never adjusted transient fuel decel tables. I was refering to the torque model for that but for a idle issue someone had.. just stating that it would change it not remedy. I wouldn't touch those at...
  6. Replies
    4
    Views
    147

    I haven't seen a ngc4 that didn't have torque...

    I haven't seen a ngc4 that didn't have torque model / friction tables. Its worth checking.
  7. In park if I gave it gas it would rev high and...

    In park if I gave it gas it would rev high and hold. Now it drops much better.
  8. That's exacty why i used negative values in...

    That's exacty why i used negative values in there.. this vehicle had throttle hang when you would step on it.. now it doesn't.

    Of course you wouldn't need to add value to the low end, just put in...
  9. Replies
    4
    Views
    147

    I posted a picture of modifications i did on a...

    I posted a picture of modifications i did on a cammed stage 4 in the other post.. good luck bud.
  10. So being that this vehicle didn't have a Minimum...

    So being that this vehicle didn't have a Minimum airflow table, I needed to adjust the friction table in order to keep it idling till i could verify with a afr gauge.. you all know the NN vehicle's...
  11. Yes. The trick is going to be your torque model...

    Yes. The trick is going to be your torque model friction table. Let me screen shot one i did for a tsp stage 4 that had some rev hang with some minor tweaks you can get it golden
  12. If the rpms reach the rpm fuel rev limiter.. yes...

    If the rpms reach the rpm fuel rev limiter.. yes it's going to close the throttle body in an attempt to lower your rpms below the limit..

    Always good on a 5 speed.. leave the TCM rpm limit where...
  13. Well from what I have experienced with these...

    Well from what I have experienced with these vehicles negative timing isn't always completely unwanted. But if you're trying to keep it higher I believe the Spark Torque Management Table would be...
  14. Yes it was. Even tho the setting is at a high ECT...

    Yes it was. Even tho the setting is at a high ECT it will still hit that setting. Glad I could help bud.
  15. Replies
    19
    Views
    567

    Yes sir exactly what I was referring to. If you...

    Yes sir exactly what I was referring to. If you want a custom tune let me know :P
  16. Replies
    19
    Views
    567

    Set unlock and lock tables 3000k across 1 and 2.....

    Set unlock and lock tables 3000k across 1 and 2.. and on 3 just max it to about 6k or you can set lockup to about 4300 across for a 6k rpm lockup.. you should see a big increase in your 60ft as well...
  17. Replies
    1
    Views
    209

    Just lock the car with the key fob, or pop off...

    Just lock the car with the key fob, or pop off the start button to get to the fob switch and turn it on that way.. also can try pushing the button with the key fob to turn it on.. Sometimes when...
  18. Replies
    19
    Views
    567

    Well if it's cammed now, it's likely an issue, it...

    Well if it's cammed now, it's likely an issue, it needs a larger converter to idle smoothly. Recommend upgrading to a 3200. You could try keeping 1 - 3rd gears unlocked to help a tiny bit with take...
  19. Replies
    13
    Views
    376

    There is most definitely some sort of issue with...

    There is most definitely some sort of issue with it. But honestly her laptop always gave me the updates and mine didn't, I even had them both working at one point for tuning and hers always showed...
  20. Just made changes to the transmission, I notice...

    Just made changes to the transmission, I notice it's boosted, wouldn't want to touch the motor side without being there..

    Transmission seemed a little aggressive.. anyhow, let me know if these...
  21. I tune Chrysler / Jeep / Ram / Dodge for a...

    I tune Chrysler / Jeep / Ram / Dodge for a living.. if I can fix your issue in one revision would you consider a full tune? lol but honestly there is a super likely possibility that you have a...
  22. Replies
    13
    Views
    376

    I have that issue on my laptop but when i was...

    I have that issue on my laptop but when i was using my gf's laptop it always found updates. Weird. Maybe it's a firewall thing.
  23. Replies
    56
    Views
    2,871

    This has me confused: 03 Ram 1500 SRT10 8.0...

    This has me confused:

    03 Ram 1500 SRT10 8.0
    03 Ram 1500 SRT10 8.4

    Didn't the srt10 come out in 2004?
    What is a 8.4, it's a 8.3. Also the 8.0?
    Is there a typo here?? Thanks
  24. Replies
    40
    Views
    1,559

    Well i'm speaking from having on hands training...

    Well i'm speaking from having on hands training with a knowledgable tuner and than just having to go out and test. I've never had any problems with any of the 100s of vehicle's I've worked on so far....
  25. Replies
    40
    Views
    1,559

    Your best knowledge will be hands on practice....

    Your best knowledge will be hands on practice. Keep running through the forums and researching and testing and testing and testing brother. Good luck
Results 1 to 25 of 131
Page 1 of 6 1 2 3 4