Search:

gotcha. I had to look through 4 stock m6 files in the repository and finally found one that matches the same OS as my buddy's file. the segment swapper option was now selectable and I was able to...

any chance Dayhoff or 2000Firehakw re-upload their copy of their tune file for the automatic trans settings pretty please?

I also notice that when I open any of the LNF tunes in the repository and look at the transmission section all of the data are grayed out and blank? if I just look up any other file like ls1, l67,...

i'll double-check and re-download ones that says automatics in the description under the tune repository and will report back.

I recently bought an HHR SS and currently tuning the trans tables. found a GMS1 tune in the repository and when I use the compare feature I noticed the GMS1 settings are all grayed out and blank?...

I recently started to use the scanner aspect of the software. I created a custom layout such as adding the parameter to read from my wideband as well as adding other parameters. the instant I hit...

thanks, i'll give it a shot.

how and where can I contact him?

don't forget the 2zz crowd!

any update on a Toyota support? :pray:
I recently bought a Pontiac vibe gt but came with the Toyota/Yamaha 2zz.
I recently am tuning my z28 with hp tuners and would hope HP Tuners open support...

greetings all. recently installed/upgraded to 3.0. when I did a partial write, it appears that the software wants to do a firmware update but after a few seconds it gave an error and failed the...

Figured I?d try and post in here since the other section doesn?t have as much traffic. *mods if this isnt the right section please feel free to move it)

Currently tune via HP tuners for my 01...

good news is that i fixed the lean issue and it was not in regards to the wideband. it ended up being the fuel filter. it was in need of change. its currently running ~12.5:1 from 2nd gear up to...

i would hate to think the fuel pump's going for this one as well (the 98 firebird from a year ago was having fuel pressure/pump issues when i bought it).

i believe i removed the O2 for both sides on the scan. i am not at my laptop(at home), 10SS, can you tell which sensor frame 161 says please? i still have the driver side narrowband sensor in the...

even if thats true, wouldnt it get tons of knock? a few days ago when i noticed it was showing 16.00 i added as much as 20% above the 7k-11k hrtz and it was still at 16.00. at 20% i think thats too...

so i attached it to the one ground that's above the hood release button and it still goes to 16.00 as i go further on the gas pedal. I'm stumped. It doesn't get any kr at all.

ok, i'll look around underneath the driver area for a solid chassis/frame for a ground. hopefully that'll fix it. :pray:

hmm i'll see if i can relocate it somewhere else. currently its bolted to one of the steering column backets. thought that was sufficient chassis/ground.

for the record i had a firebird a year ago and tuned that in OL but was using a AEM UEGO Wo2 and i just mimic-ed the hpt file from that to the camaro that i have now since the firebird tune ran w/o...

got a 01 z28. recently installed the NGK AFX powerdex into the passenger B1S1 and tuned for OL in the pcm as well as hooked up the analog into the hp tuner (got the pro version). at idle and cruise...

i'll try it sometime but for now i'm just goijg to use 2.24.951

currently just installed 2.24.951 and just did a quick scan (no logs) and the parameters work. looks like i'll be using this version for now.

bump

just got my pro version from another member for my 01 camaro ls1 A4 car. did a scan and i noticed that a few of the parameters look way off such as the following:
both LTFT and STFT were at -100,...