On that pull you had 1 area that knocked, if you look it was removing it but stock settings it takes forever to remove it. I sent your tune back with a few changes.
Type: Posts; User: n2ov6
On that pull you had 1 area that knocked, if you look it was removing it but stock settings it takes forever to remove it. I sent your tune back with a few changes.
On your knock (-X) is good, its adding timing. you need some cam adjustments on the little I have seen.
Is your car auto?
You need to log all 16 map points. you will have to remove some timing or do some cam adjusments. send me you tune and I will make some adjusments for you so you can see what I am talking about....
Not all that good. had a lot of spinning.96013
96014
Honesty idk how much whp it makes lol. I rescaled my maf after removing cats, on the log look at the ltft+stft and I used that to recsale it. I guess its possible no cats can do that but i'm not 100%...
Don't change the mbt, change your "spark decal" under tip out to -30*. Here is a pull on mine, stock car with 87 gas. I have a little area looks like I need to change but i'm not worried about it...
give me about 10 mins I will go do a pull and show you the difference. My car is a 13, stock everything minus cats.
96005
give me a sec may have to upload my whole scanner setup. lol
96004
put this in your scanner and do another run. I also noticed (using my stock tune) looks like you changed your mbt table for #1, DONT change any timing on mbt tables. on your tune a lot of...
You need to log a few more pids. What is your cam timing doing? mine also runs .820 area lambda at wot with 26+ timing