Okay, I appreciate your help and your response so I guess what I'm going to have to do is to go ahead and hook up my wideband I'll have to look at the procedure I think it goes back through the AC...
Type: Posts; User: doww301
Okay, I appreciate your help and your response so I guess what I'm going to have to do is to go ahead and hook up my wideband I'll have to look at the procedure I think it goes back through the AC...
Hi,
I have an '06 GTO with a forged bottom end and ported LS3 top end including Fast 102 with a Vring adapter to use the GM LS3 throttle body. The engine also uses a BTR Stage 4 LS3 N/A cam - All...
I went over to my shop area today, 05/15, and turned the key, started right up without any pedal - yay! Once it warmed up a little I turned on the A/C and put it in gear - idle drops 100-200 rpm and...
Hi,
I'm pretty new to this forum as far as posting is concerned, but I have been reading posts for awhile. I could use some help from someone with some good experience tuning Gen 4, LS engines. For...
Ok thanks for the reply-I will lower the knock sensors back to 450 and change decay and then try retuning. I did change both VE and maf. I had stft's of about 15 to 20 upon starting up. I got them...
Hi Everybody: I'm new here and I have a '06 GTO that I recently finished up doing HCI and long tubes on - car also has a vigilante 3600 stall and upgraded one piece drive shaft and half shafts. I've...
Hi to everyone:
This is my first post to this forum and I hope someone can please help me. I have a 2006 GTO and I'm doing an H/C change over and am switching to 46 lb injectors to allow a possible...
Uh Yeah, i was that guy. I got it all straight now and it's working great. As soon as i begin to tune VE I will post my tune file and hopefully someone will be willing to give me an assessment of...
Hi:
I bought HPTuners Pro about two weeks ago and have been reading a lot from a book I have and studying online. I went today to read my ecm and as soon as I connect my laptop to the OBD2 port...