Search:

looking for a stock file to use to segment swap to a manual from the Allison os number 12587603 will attach stock file86223

sorry new at this at this point just trying to get spark and injector pulse think it is missing an ignition fed have a lot to change yet was trying to make sure the tune wasn't my no spark issue did...

crank log

the truck it came out of was cable throttle

did write cal only 4l80 and cable throttle

need some help have no spark on injector pulse no a new build attached is the file in the pcm. have power and ground at the coils cranking rpm on the scanner vats is set to none what am I missing

Can you change the vin in a used transmission Tcm with a hp tuner so factory programming will work

Thanks will work on that

just did the manifold all in good shape will go there was suspecting I might have a maf issue. does the tune look fairly good new at this. thank for the reply.

long term trims are running 17 to 20 at cruise about 2000 rpms seams fine everywhere else looking for a bit of help fairly new at this will post a log and tune file

thank you that is what i did and it seems fine. a customer of mine put a used motor in the car and the motor didn'thave the correct head for secondary air

can i turn off the secondary air system on this car

will it still go in to limp mode if you disable the code

Exactly

what other changes do I need to make or just switch the enabled to disabled