Rich after flash is a common e38 pcm thing. Log intake valve temperature and you'll see. Just zero out the offset vs. inj temp table under Fuel - General while tuning to get around the rich...
Type: Posts; User: Poopsy
Rich after flash is a common e38 pcm thing. Log intake valve temperature and you'll see. Just zero out the offset vs. inj temp table under Fuel - General while tuning to get around the rich...
The 6l80e I rebuilt with Sonnax goodies for a 2010 L99 Camaro just laid down 604rwhp on e85 and 12psi. Stock bottom end and only valve springs up top.
Keeping the shit pressures high, times low...
That converter and car combo can be left unlocked 1-4.
Set Normal, Pattern A/B, and TUTD patterns to TCC Apply speeds 1-4 318mph, 1-4 release 317mph, leave 5th and 6th alone
Full throttle...
Use the zr1 bias and filter tables for charge temperature if you relocated the IAT there.
Pretty sure it's zr1 that has iat in manifold by throttle body.
That's good to hear then there must be something wrong on my part. I'll dig in to it again and update posts if I get it working.
No I have no been able to read any input from the mvpi2 pro link.
I have gone back to a/c pressure switch circuit for referencing my wideband. Maybe my pro link is kaput and there was a bad...
I do believe I set the pid by using Transform on the mvpi2 pro analog 1 channel and selecting aem 4110.
In VCM Scanner under channels the mvpi2 pro analog 1 is transformed to aem 4110. The...
I did the same thing when first trying to sort out the Pro Link stuff. Cheers!
Just got the Pro Link in and trying to log my wideband in VCM Scanner. I'm not able to log any data and I don't really know what I'm doing.
The white AEM wire from gauge goes to Red Analog 1...
Under Channel Selector > External Inputs
you'll see MVPI Pro, MVPI2
MVPI2 Pro only has two analog inputs with the pro link. MVPI pro has four listed.
Select MVPI2 > Pro Link
if MVPI2...
Use the new vcm scanner 4.3.60 beta and you'll see mvpi2 > pro link listed in the channel selector.
I haven't been able to get my aem uego to jive with vcm scanner with a mvpi2 pro link though.
Just applied it. Oopsies! I've started over a few times new from my stock file and must have overlooked that one.
MAF has been deleted and I haven't ever been a fan of recirc/compressor...
This is my first go into tuning, hptuners and vcm editor. I could use quite a bit of help trying to get this car moving under it's own power. As of now it starts and idles poorly, runs very rich. ...