Any update? can anyone reach out to support? we need support for ethanol sensor and addition of 4 bar map and ability to log wgdc. Ive tried asking support maybe if someone else reaches out they will...
Type: Posts; User: boostboy
Any update? can anyone reach out to support? we need support for ethanol sensor and addition of 4 bar map and ability to log wgdc. Ive tried asking support maybe if someone else reaches out they will...
post your file
I'm having this issue. Can someone help me like ASAP. My ecu was bricked on HPT and I replaced the ecu and had it coded to the vehicle now I cant flash my tune on. I have licensed this vehicle...
can you do this for MED.17.1.1 VAG?
I know its very different, or can you refer me to anyone. Mine is stuck in boot mode after car dying during flash
try this one out. I redid those 2 tables similar to mine but higher numbers. I saw a video from a mercedes tuner working with a c63 so may not be the same, but he had to add rows to optimum engine...
Great points. Like i said, logic may be different for your ecu, but yeah whatever works in your case.
also for the WMI you are definitely right about that. chargepipe is a good spot to spray too...
It definitely put me off that your tq to load scaling only goes to 80%, trying at 100% for scaling was my first thought as an experiment, not knowing if you tried that already. But assuming stock...
Heres a file I only tweaked those tables and left everything else as you had it. Try it out and see what you think. Its hard not knowing what load your car is actually hitting typically but i set up...
Can you post your tune brother I will add some tweaks on there for you to try out on these tables. Its easier than trying to explain the logic and you can see what you think of it. I did have the...
Awesome congrats. I wonder if they will help if I submit a ticket about the missing table to enable flex fuel sensors on this ecu?
lol might be wishful thinking
Just wanted to add some interesting info.
After reading this thread and trying to figure out the best approach, i decided to change the scaling of my optimum engine tq tables to match the tq to...
I really wanted to help but it seems that table is missing from yours. I do have that option under fuel/ Cuttof, DFCO under RPM limits, but yours is different
Hey chev thanks for the help, I finally got a chance to try that file and log it. The desired map and actual are always on point or very close
I'm also seeing 99% tq request so both of those are...
Just wanted to add to this thread. I changed a few things around. More importantly I raised those tq limits, and man its smooth as ever and making a lot of boost,Car isnt knocking at the boost levels...
I'm making this thread for insight, open to any criticism.
2013 S6 with Rs7 turbos
Mainly wondering if I am approaching the tq tuning/driver demand correctly?
Turbo settings? Most of it is...
Honestly you have to understand that this side of the forum is pretty dead. Not a lot of people tuning audi/vw with hptuners. And its an even smaller amount that actually goes on forums. I have found...
You can definitely do all of that and more with hptuners. for the ZF at least
Sometimes tuning these ecu feels like trying to crack davinci's code lol I've been having a lot of fun with it though, but yeah talk about tumbleweeds. The VW/audi side of the forum is even more...
Man I really appreciate this response, this is the most informative help ive gotten, I will take a look at each thing and see how it responds
I should also add that a lot of the tables I copied...
Stock map attached for reference.
Lots of useful info in this thread.
I have been trying to mess with the torque tuning, I was having issues with overboost at partial throttle, stemming from Base TIP issues
I have a 2013 Audi...
Not sure if this helps but I have an S6 with ethanol sensor wired into OBD port just like DS1, but Hptuners does not read it. I cant find anywhere on the tune where I can enable a flex fuel sensor,...
Hard to say without a log, but It could be the car running out of fueling up top. It was for me at least on my 3.0T
Does anyone know how to enable burble on startup for this ecu?
ended up getting it sorted. thanks