I have a couple of buddies with early 900's but no support for those?
Type: Posts; User: longstroke
I have a couple of buddies with early 900's but no support for those?
Bump for polaris tuning?
https://forum.hptuners.com/showthread.php?45764-HOWTO-Ford-Speedo-Correction&highlight=f150+speedometer
This is all I could find.
And I can't believe some places are charging $550 to flash a computer.
Bump.... I constantly have customers wanting ranger and rzr tunes.
I've got an 18 f150 I need to correct the speedometer on also. Any help?
bump...
Bump.. I've been wondering this myself.
I know what shift modulation is, I just need to figure out whats making it happen here.
I do know that the map sensor is not getting an accurate reading because of where I have it right now, and...
I swapped on an 18 gt intake and if I raise the shift points over 6500 it hits this torque source and pulls the timing back in the low single digits and drags the shifts way out. I have all the...
I just bought a 17 f150 for myself and the rev/mile is not in the special functions.
Can I swap stock 15 up mustang cams in and just change the firing order in the spark table over to a mustang firing order since the trucks have a different firing order?
I've calibrated a few with no problems.
You use the scanner special functions and change the rev per mile. You don't even have to license it for this.
Can the nGauge be used with more than one vehicle? Or do you have to have a new one for each vehicle?
So how does the licensing work with that? Is the VCM still used? Somebody explain this to me. lol
I turned it on in the tune on my 14 but it doesn't work.
It was tip in retard on mine. It was pulling 3-5 degrees for no apparent reason at wot. I showed it to Eric one day at the track and he zeroed the tip in retard and it was gone.
It's on my 14 mustang.
I've been fighting the same with mine for a while now. It goes to target n torque source and torque control spark source. Sometimes it shuts off.
I wish I could just disable target n.
What is "tq mgmt array"
I uploaded it in the repository.
I don't have it here at work or I would post it in here for you.
I've compared it to a few 15-16 truck tunes, but the expedition has some tables that the trucks...
I'm only using half of them on my turbo car. It seems to be working fine, and made things a lot easier for me.
I've been poking at this thing a little, but I can't get the throttle to stay open with the pedal on the floor.
Anybody care to share some advice to get me going in the right direction?
I've been...
I just bought one of these and it's my first ecoboost. most of it looks foreign to me!
Anybody care to share some tuning on one of these?
Bump on an old thread..... I was just searching trying to figure out how to do what kaineoutlaw is talking about here^^^ is that possible?
Load based lambda table would be awesome.