Search:

Type: Posts; User: BMFIROC-Z

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. nobody knows?

    nobody knows?
  2. when is the 3-2 shift solenoid supposed to be active/on?

    i have a freshly rebuilt "built" 4l65e that shifts great in all gears except 4th gear/overdrive,it wont even try to engage 4th when commanding it manually through hpt..anyway,i did some logging...
  3. Replies
    1
    Views
    218

    Wanna help me dial this thing in??

    Trans tuning noob here..Im trying to get this "built" 4l65e/4k stall swap dialed in,i think im close but pretty sure it needs some tweaking still, car is an 87 camaro h/c/I LQ9 swap w/0411 pcm,3.73'...
  4. anybody??

    anybody??
  5. after remembering to re-enable auto trans diag...

    after remembering to re-enable auto trans diag codes,it started throwing a code p0758,checked /verified wiring from pcm to solenoids,checked solenoids themselves and all checks out,im stumped..any...
  6. UPDATE, I made some changes and got it shifting...

    UPDATE, I made some changes and got it shifting much better and also managed to get a short log recorded that I will attach with the current tune file I made the changes to..as I said before, it...
  7. "built"4l65e swap with 0411 pcm seems to be slipping...help please.

    I just swapped a supposedly "built" 4l65e/4000 stall into my car which was previously a t56 car and is currently running an 0411 pcm,i purchased the trans connector and pinned the 13 wires to the pcm...
  8. Replies
    1
    Views
    440

    alpha N VE Tuning (2000 s10 2.2)

    was trying to set up a histogram for ve tuning on my 2000 s10 with the L4big pcm and noticed first off theres like 4 areas within the main ve (idle,high rpm,low rpm double fire,low rpm single...
  9. Wow,ok..gettin help on this site is like pulling...

    Wow,ok..gettin help on this site is like pulling teeth..unless ya got money to throw around no one will help,thanks peeps.
  10. Nevermind,figured it out myself.

    Nevermind,figured it out myself.
  11. Nobody has any tips??

    Nobody has any tips??
  12. Nobody knows?..or knows where i could find said...

    Nobody knows?..or knows where i could find said info??
  13. oops,wrong forum..admin please delete

    oops,wrong forum..admin please delete
  14. Any tips on squeezing a little more power out of a 2.2L s10?(pe delay,torque man etc)

    as the title says,just looking to squeeze a little more power out of my 2000 2.2L s10..im relatively new to tuning and this pcm.. the pcm in this s10 is quite a bit different than my 0411 pcm in my...
  15. any tips on squeezing a little more power out of a 2.2L s10? (pe delay etc)

    as the title says,just looking to squeeze a little more power out of my 2000 2.2L s10..im relatively new to tuning and this pcm.. the pcm in this s10 is quite a bit different than my 0411 pcm in my...
  16. Need pcm pinouts for 2000 s10 2.2 L4big pcm (want to wire in a electric cooling fan)

    Not real sure if I'm posting this in the correct forum but..as the title says,im trying to wire an electric cooling fan into the stock pcm of my 2000 s10 2.2L with the L4big pcm..the truck came stock...
  17. thanks,i appreciate the reply,found the main...

    thanks,i appreciate the reply,found the main ground was loose causing it to die intermittently,took it for a long ride and it never died,i think its good to go now
  18. 2000 s10 2.2 no ignition cylinder,vats disabled..dies going down the road

    ok,got a good one here guys.. I inherited a 2000 chevy s10 extreme 2.2L and the previous owner lost the keys so instead of fixing it correctly he removed the ignition switch entirely and "bypassed"...
  19. Awesome,thanks for the heads up

    Awesome,thanks for the heads up
  20. awesome,thank you for the quick response,much...

    awesome,thank you for the quick response,much appreciated
  21. First time Real Time Tuning..any tips/suggestions?

    As the title says..im about to take my first crack at (RTT) Real Time Tuning tomorrow.. i already have a file ready with the 1 bar MAF OS enhancement (1283002) and I know I have to do a "Write...
  22. How to subtract fuel/advance from ve/spark tables??

    Got another noob question for ya's.. im about to try my first crack at real time tuning tomorrow and was just wondering,what is the correct way to SUBTRACT fuel or spark?..i know how to add...
  23. nevermind,problem solved.(operator error)

    nevermind,problem solved.(operator error)
  24. Dialing in IAC counts/idle/TPS voltage...

    As the title says,im trying to dial in my IAC counts to 0-20 per the guy that's helping me tune my cars request and I'm having a heck of a time achieving said values.. if my adjustment lets iac...
  25. ok,I did what you guys suggested,does it look...

    ok,I did what you guys suggested,does it look like I did it right?

    73826 73827
Results 1 to 25 of 46
Page 1 of 2 1 2