Search:

Type: Posts; User: badcoupe

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. Thread: LML read

    by badcoupe
    Replies
    2
    Views
    131

    LML read

    we cant read existing file? Have to use a supplied calibration?
  2. Replies
    3
    Views
    161

    Check your ltft and sftf that can lend you a lot...

    Check your ltft and sftf that can lend you a lot of info. If they?re high ie; 9 or more it?s lean. If they?re the opposite, negative numbers it?s rich
  3. How about disabling the code set it to no error...

    How about disabling the code set it to no error reported, see what happens then.
  4. Replies
    3
    Views
    161

    What are your long and short term fuel trims?...

    What are your long and short term fuel trims? Typically a bit contrary as the ambient temp goes down? If so I?d be looking at intake gaskets, fairly common on those plastic plenums. If your fuel...
  5. Replies
    1
    Views
    257

    Are you running a aftermarket lockup converter or...

    Are you running a aftermarket lockup converter or the upgraded 3-5 sol? I have a few for both stock trans and with the aforementioned upgrades. If you have the better solenoid then you?ll want a...
  6. Replies
    4
    Views
    226

    Have not had one local to at least do a read on....

    Have not had one local to at least do a read on. I?ve been trying to get reads on as many of my euro customers cars as possible for research/prying around to get a feel for the software. Wish we...
  7. Replies
    95
    Views
    21,832

    It would be easy/possible to keep a mobile device...

    It would be easy/possible to keep a mobile device like phone in drivers suit to record data during hotlaps or race that I could look at in the pits to help make changes, that?s what I?m after anyway....
  8. Replies
    95
    Views
    21,832

    I Would like to get data logging going via...

    I Would like to get data logging going via Bluetooth to an iPhone, no way to keep laptop in racecar while racing but really need to be able to scan/log. My laptop finds it via Bluetooth but my iPhone...
  9. Replies
    1
    Views
    271

    I?ve wanted for same thing for awhile. They use...

    I?ve wanted for same thing for awhile. They use them in the ecotec division 2 midgets. Looks just like standard gm pcm, I was shocked I couldn?t communicate with it via hp or tech2win/gds2
  10. Replies
    7
    Views
    660

    I?ve-used both on on same laptop no issues....

    I?ve-used both on on same laptop no issues. finally sent both in to get my credits from mpvi1 transferred to new one. Had no issues both at same time.
  11. This happens with previously tuned and locked...

    This happens with previously tuned and locked ford diesels for me including my personal power stroke. If I put it back to stock I can read no problem but tuned all it will read is ficm and tcm but...
  12. Replies
    54
    Views
    1,457

    They are part of continuous communication line...

    They are part of continuous communication line two from one module into the next then two from that one to the next etc I?ll try to save diagram to post here since I can?t link to it being a closed...
  13. Replies
    54
    Views
    1,457

    also x1 18 at pcm and x1 13 at tcm should be...

    also x1 18 at pcm and x1 13 at tcm should be switched ign voltageviolet/yellow they are connected together at a splice in the oem harness then they went to the bcm
  14. Replies
    54
    Views
    1,457

    connector X1 at PCM pin 29 blue wire to pin 6 at...

    connector X1 at PCM pin 29 blue wire to pin 6 at obd2
    connector X1 at PCM pin 43 white wire to pin 14 at obd2
    pins 4 and 5 at obd2 ground
    pin 16 at obd2 voltage
  15. Replies
    54
    Views
    1,457

    I will in the morning when I get to my shop...

    I will in the morning when I get to my shop laptop. You need the serial data lines from pcm to obd2 port?
  16. Replies
    2
    Views
    264

    User defined Lml

    Anyone have user defined for Lml trucks?
  17. Replies
    2
    Views
    318

    looks like a standard E40 pcm so it should be...

    looks like a standard E40 pcm so it should be tuneable
  18. Nothing in the repository? I can get you a stock...

    Nothing in the repository? I can get you a stock file from my 06 f350 but not sure if it will work for you. There were so many different calibrations. Does yours have mass air, I?ve had some come in...
  19. Replies
    1
    Views
    232

    Did a read on my 6.0 the pcm didn?t show

    Thought I would do a read on my personal truck. It picked up the tcm and ficm but not pcm. It is tuned via sct I suppose it?s locked?
  20. I have a 30-0310 with can wires hooked to my pro...

    I have a 30-0310 with can wires hooked to my pro link can wires not seeing it pop up when I go to add a channel though even after re-polling. Will it not support this yet?
  21. Replies
    4
    Views
    431

    You?ll want to drive it there or to someone with...

    You?ll want to drive it there or to someone with a pass-thru programmer then switch pcm tcm and have them programmed to the truck, then after wards load your tune files
  22. Replies
    4
    Views
    253

    I?m fairly certain that pcm isn?t supported, it...

    I?m fairly certain that pcm isn?t supported, it the black one with 4 connectors? I believe you have to change to the newer express van pcm for that engine that uses two connectors to tune those
  23. Replies
    7
    Views
    266

    Also suspect cam timing the top guide bolt is...

    Also suspect cam timing the top guide bolt is prone to breakage as well as phaser failures at those kind of miles
  24. Replies
    3
    Views
    246

    I have pro feature set and the canbus setup works...

    I have pro feature set and the canbus setup works great no offset voltage to deal with etc. I cannot however get afr error to log in my histogram.
  25. Replies
    3
    Views
    246

    Nobody? I?m driving myself crazy with this damn...

    Nobody? I?m driving myself crazy with this damn thing
Results 1 to 25 of 44
Page 1 of 2 1 2