Thanks for posting. All the hoses are the factor length. Guess I'm going to try a Atmosphere blow off valve. Can I try this to see if it works before I relocate the maf? Will it just be rich for a...
Type: Posts; User: ecotecjohn
Thanks for posting. All the hoses are the factor length. Guess I'm going to try a Atmosphere blow off valve. Can I try this to see if it works before I relocate the maf? Will it just be rich for a...
Well my buddy had his 6758 turbo off to replace his exhaust studs. So I borrowed his turbo. His turbo was fine just like my old one. No flutter. I'm stumped. Going to try and pull my old Compressor...
So I found a boost leak today. And I did a compression test all 4 holes are dead on 180lbs. I put the bpv spring out of my old K04 seemed lighter. And if I just dead lift of the throttle no flutter....
I understand. The old turbo shaft snapped the exhaust turbine was laying an exhaust housing. Looks like the shaft is pinned for some reason it snapped at the pin. The shafts tiny in these things.
Before I do a relocate of the maf. Can you think of anything else that would be causing this. What i dont get is i ran the same turbo for over a year and never had a flutter. That turbo broke i...
Thanks for the advise cobalt over booster. Do you think I could still run the factor recirculation valve and put a atmosphere bov before TB and pull vaccum off the manifold for that one? Would I need...
Hello I'm hoping someone in here might be able to help me figure this problem out. I've got a LHU running on a LNF 2010 cobalt ecm. Engine is all stock other than a 6758 turbo from zzp. 25 lbs of...
Marksawatsky I just built a airboat with a 2013 lhu and I'm having same issue only getting 30% throttle I would really like to talk to you. If you can email me at [email protected] thanks john