Yes, I guess I used the term loosly. I set my analog out to that, but when I'm calibrating my HP, I set both high and low to 2.5, so that it should read 14afr in HP constant, and the I configure my...
Type: Posts; User: bluGTO
Yes, I guess I used the term loosly. I set my analog out to that, but when I'm calibrating my HP, I set both high and low to 2.5, so that it should read 14afr in HP constant, and the I configure my...
I'm getting the dreaded 8 blinks now. I think I need to heatsink my sensor. That's the second sensor this year. It was probably getting ready to die.
I did have it calibrated from 0-5v = 10-18...
Where do I look to fix this? I have a LC-1 with a sensor that's only a couple of months old, tops. It seems to work in hp at low rpm and low kpa, but as soon as I start driving, it flatlines. At...
I've got a 2-bar tune, and I'm trying to learn as fast as I can. Here's my tune and a log where I did a couple of pulls.
My timing comes down to 14.5 right at the lean spike at the beginning of...
I like split vertical, but what happened to me was my view of the 3D chart was from dead above, instead of from a perspective. Go to the chart and right click on it, then drag it around; you can...
I just did some logging today, and when I hooked my interface up, it said that I needed a firmware upgrade(which I did).
Now my 3D chart view in my VE table is like an above view instead of a...
I don't see a wideband inserted in the table in the EIO inputs.
My guess is that you can run whatever OS is available...whether or not you're FI. Just click on the OS pull-down menu and see what's available. You need the corresponding MAP sensor to go with the...
Okay, I made those changes (I think) I'll flash it and do some logging with it tomorrow.
Thanks :)
I need some help and advice from those who are in the know :)
My car is a 2004 GTO, with 1 7/8 catted headers; Comp XR275HR cam (222,224,566,568, 112LSA), and a magna charger.
I've looked over a...
I did the same thing last year and it popped the bcm fuse.
http://www.hptuners.com/forum/showthread.php?t=8827
http://media.urbandictionary.com/image/large/yarly-34109.jpg
Thank goodness that these things are fused!!!:yay:
I plugged in the OBD2 cable into the external monitor port of my laptop.
Help.
I think that I just fried my PCM. I don't know what I was thinking, but I went out to the car to go out and log some time on the road, and I plugged my cable into my laptop instead of my...
There is a button on the pro kit that you push to data log. You can't see what's going on, since you don't have a laptop hooked up, but you can download the log to your computer later.
...
Database: H.sapiens
Entry: 2222
ENTRY 2222 CDS H.sapiens
NAME FDFT1
DEFINITION farnesyl-diphosphate farnesyltransferase 1 [EC:2.5.1.21]
ORTHOLOG KO: K00801 ...
Hi Everyone,
My name is Keith, and I have a 2004 GTO. I've put headers, cam, clutch and gears in it. It has been tuned at Vector Motorsports in Clinton Township, MI.
I really had no desire to...
It sounds like you're just clicking in the wrong cells to paste.:crazy:
Sorry Jerry; nobody is replying, so I had to offer my help:shrug:
I'm newer than everyone here, so I may be wrong, but from what I have read about upgrading, there is no discount to add another vehicle; if you want to upgrade from a single vehicle license to a...
I'm sure that someone will correct me if I'm wrong here, but the way I understand it is that they credit you 75% of your existing credits towards an upgrade. 18 credits x 75% = 13.5 credits.
70...
I looked into buying a couple on LS1 Tech, and ended up buying new. The only way buying used is a deal is if your model year and car is already licensed.