Search:

Type: Posts; User: 89 Caprice 6.0L

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. Ran the scanner on it today and was able to...

    Ran the scanner on it today and was able to unlock the converter with it, so I don't think anything is wrong with the wiring. I am thinking it came from the factory set up like that.I have never felt...
  2. 4L60E Trans Converter Clutch opperation

    2006 Silverado Crew Cab 4WD 5.3L 4L60E. I decided to put the scanner on my DD and see what it was doing. The one thing I thought odd is that the converter clutch applies as soon as I hit about 10mph...
  3. Replies
    26
    Views
    644

    Sounds like it might be wired wrong. The feed for...

    Sounds like it might be wired wrong. The feed for the injectors needs to be powered ,run position and start position,sounds like its wired through a acc wire out of the switch,the power would go away...
  4. If it would help,look at my post in GM V8 Tuning...

    If it would help,look at my post in GM V8 Tuning - Engine, Gas (Gen 3) "when I put it in reverse" mine is set up to apply at 35mph in 4th. I can even post the original tune where it locked in 2nd...
  5. Replies
    8
    Views
    201

    I was actually looking for comments on the tune....

    I was actually looking for comments on the tune. Do I have all the settings correct for drag racing.Do I have the knock sensors desensitized correct.I think all the torque management settings are...
  6. Replies
    8
    Views
    201

    Thank You for the reply's and...

    Thank You for the reply's and recommendations,will do some more fact finding and when "money bags",my son, gets the funds together,the fun begins.
  7. Replies
    8
    Views
    201

    Going to get what injectors I will need in the...

    Going to get what injectors I will need in the end and looks like the 2 bar will be what I will go with.On with more research.
  8. Replies
    8
    Views
    201

    It was set at 550rpm stock and I bumped it up to...

    It was set at 550rpm stock and I bumped it up to 630rpm,it seems odd that it only happen in reverse,will bump it up some more.
    I know my stock injectors are running almost at the limit now,looking...
  9. Replies
    8
    Views
    201

    When I put it in reverse

    Sometimes when I put it in reverse,the idle dips down to around 500rpm,almost wants to stall,then it will finally smooth out.It happens around the end of this scan,when I go to back up my driveway...
  10. I sent the gauge back,that is where the problem...

    I sent the gauge back,that is where the problem was.Will be watching on what they tell you. I bought mine 3-3-2019,sent in to repair 4-3-2019, what was mentioned before,a BAD batch?
  11. When my gauge was new,the first ride around the...

    When my gauge was new,the first ride around the block,it just pegged out straight lean.Driving it some more,it would read like it should,then it would go straight lean. I called and sent it back to...
  12. Happen to have a AEM 30-4110 gauge? Mine did the...

    Happen to have a AEM 30-4110 gauge? Mine did the same thing other day too,pegged the gauge out at over 18,but it was running fine.Had the scanner on at the time with short and long term trims on....
  13. Replies
    10
    Views
    359

    More thinking on doing that. Before I changed the...

    More thinking on doing that. Before I changed the setting it was,I guess,a pulse ground making the relay to click off and on.After the change it is a steady ground. Might do something to the AC...
  14. Replies
    10
    Views
    359

    Mine was set on AC Recirc,I'm guessing try and...

    Mine was set on AC Recirc,I'm guessing try and change it and see if the recirc works.
  15. Replies
    10
    Views
    359

    Thank You Sir,works perfect now

    Thank You Sir,works perfect now
  16. Replies
    10
    Views
    359

    I switched the trigger wire from fan 1 to fan 2...

    I switched the trigger wire from fan 1 to fan 2 relay and it all works as it should. The ground that works the trigger for fan 2 from the computer is on and off,should be a constant ground,not on and...
  17. Replies
    10
    Views
    359

    Fan 2 control

    P59 computer,OS 12579405,Blue + Green connectors. Had 1 fan connected to pin 42 Blue connector,worked good.New radiator installed with 2 fans. According to Lt1swap.com,I add a wire to pin 33 Green...
  18. Replies
    3
    Views
    158

    Would a file from a 2003 Express Van work for you...

    Would a file from a 2003 Express Van work for you ? LQ4 6.0L P59 computer OS 12579405 blue + green connectors. This is the stock file that came with the Van.
  19. Replies
    1
    Views
    141

    FUEL-summer blend

    Around the Pittsburgh area,this time of the year,the fuel that is available is a "summer blend",I think it is oxygenated gas,added oxygen to the gas for a cleaner exhaust.I was just wondering,what is...
  20. Replies
    4
    Views
    320

    Power Enrichment Enable Torque%

    I have read a lot of posts on where to set the enable torque %,anything from 0 to 100. I can see different numbers in different situations,how/where the vehicle is used. My question is,I use my car...
  21. I don't have the gauge connected into the...

    I don't have the gauge connected into the computer,yet. I have just been reading the gauge. My motor is stock,running in SD,with a little VE tuning and all other torque management and timing changes...
  22. You may have a bad gauge. I installed the AEM...

    You may have a bad gauge. I installed the AEM 30-4110 in my car and it does the same thing,straight lean,sometimes. Every once in a while it reads what it should but most of the time is varies...
  23. Replies
    6
    Views
    366

    Thank you for your answer.When I get the parts,I...

    Thank you for your answer.When I get the parts,I will start experimenting.
  24. Replies
    6
    Views
    366

    Ok,that is why we asked the question on what to...

    Ok,that is why we asked the question on what to change to run the 4in MAF sensor verses the 3 1/2in van one.Did I guess right on the where change needs to be done, the Airflow vs Frequency table ? Is...
  25. Replies
    6
    Views
    366

    I was hoping that someone would answer this,I...

    I was hoping that someone would answer this,I have the same van motor as you do,and the same question.I have been comparing files I have,2 Silverado a 2004 and 2006 and mine,and the only difference I...
Results 1 to 25 of 33
Page 1 of 2 1 2