where is mass fraction on the 2018 f150 pids?
Type: Posts; User: rickfabb
where is mass fraction on the 2018 f150 pids?
I?m not exactly getting the boost control.why Is the resolution 1,000,000 on the driver demand tables.
Thank you , by axle torque you are referring to the driver demand maps correct? Is there a thread on this ecu? I looked but couldn?t find any. It?s an e80a is it the same as the e39 ats?
log attached too
heres the map so you can see what I am talking about
8742987430
As far as the torque in the torque management it?s not normal numbers under map a or map c. For example at 86% throttle at 80 mph the value is 2,894.
No it?s commanding 11.5 but I have it programmed to command 12.7 the delay is set to 0 and off above 3000 rpm. The torque percentage is set to 20%
For some reason I can put any arbitrary number into power enrichment however on the datalog my commanded does not change . Am I missing something here ? Also on the torque management map a and c the...
if someone can lay some insight as to why i am getting an intermittent stall i would highly appreciate it
thanks in advance attached are tune and log
85144
85145